Page 1 of 1

New Dutch Six

Posted: Thu Aug 23, 2018 3:41 am
by rupsus
Hi sixpack lovers,

I'm Sebastiaan from the Netherlands and purchased a '79 CBX last year.
The iconic 70ies sportsbike is one of my favorites since years, just like a Suzuki GT750 which was already in my garage.

The bike was in deep winter sleep for many years, so I decide to check everything before I hit the road.
During the first start-up it was running on only 4 cilinders and smoked a lot.
A compression test gives values of 6bars, so I took off the cylinder head and have the cylinders machined.

Now re-building the bike and I hope I can enjoy the 6 cylinder power and sound next spring

Re: New Dutch Six

Posted: Thu Aug 23, 2018 6:28 am
by steve murdoch icoa #5322
Welcome to the site, rupsus.
An engine rebuild is a tough way to start CBX ownership but the smart guys here should be able to help you out if you run into any problems.
Plus you have access to an excellent shop/supplier. http://www.sixcenter.nl/index.html

Re: New Dutch Six

Posted: Sat Sep 15, 2018 6:52 pm
by solarmoose
Welcome to the asylum.

Re: New Dutch Six

Posted: Sun Sep 16, 2018 1:36 pm
by Mouse
Been a bit lax this summer season with keeping up with posts on forum.

Anyway.

:text-welcomewave:

Re: New Dutch Six

Posted: Tue Sep 18, 2018 9:20 pm
by NobleHops
:text-welcomewave: :text-welcomewave: :text-welcomewave:

Re: New Dutch Six

Posted: Wed Sep 19, 2018 3:37 pm
by wyly
rupsus wrote:Hi sixpack lovers,

I'm Sebastiaan from the Netherlands and purchased a '79 CBX last year.
The iconic 70ies sportsbike is one of my favorites since years, just like a Suzuki GT750 which was already in my garage.

The bike was in deep winter sleep for many years, so I decide to check everything before I hit the road.
During the first start-up it was running on only 4 cilinders and smoked a lot.
A compression test gives values of 6bars, so I took off the cylinder head and have the cylinders machined.

Now re-building the bike and I hope I can enjoy the 6 cylinder power and sound next spring
Groeten rupsus...as has already been mentioned Six Center in Nieuwleusen can do it all parts and service, take a tour of his shop, Bert's a great guy and 100% trustworthy...