Kerker 6 into 2
- zxbob
- Power Poster
- Posts: 313
- Joined: Sun May 09, 2010 8:08 am
- Location: Smug - Ca.
- Location: "Smug" - California
Kerker 6 into 2
I picked up a Kerker 6 into 2 for my bike, the exhaust is in great shape "but" the megs are chrome
and the header(s) black. After much searching, I found a local plater doing the Mac exhausts that
would re-do my headers for $250.00.
I want "that sound" a CBX is known for !
This Kerker has the db killers in it and heavily packed - im not sure if I want to remove the packing
and leave the db killer in "or" remove the just remove the db killer and leave the packing ?
I guess i'll have to wait till its running and experiment - I did'nt find many comments on the Kerker
6 into 2 hear so im not sure if many people run them or not. My bike came with the DG 6 into 1 which
I cant stand . . . . and from what i've read, most people dont care much for them eaither.
Bob
and the header(s) black. After much searching, I found a local plater doing the Mac exhausts that
would re-do my headers for $250.00.
I want "that sound" a CBX is known for !
This Kerker has the db killers in it and heavily packed - im not sure if I want to remove the packing
and leave the db killer in "or" remove the just remove the db killer and leave the packing ?
I guess i'll have to wait till its running and experiment - I did'nt find many comments on the Kerker
6 into 2 hear so im not sure if many people run them or not. My bike came with the DG 6 into 1 which
I cant stand . . . . and from what i've read, most people dont care much for them eaither.
Bob
Good parts aint cheap ~ and cheap parts aint good !
- Dave Hansen
- Power Poster
- Posts: 251
- Joined: Sun Mar 09, 2003 10:09 pm
- Location: Western New York, USA
- Location: Western New York, USA
Re: Kerker 6 into 2
I have the 6-2 on mine but I adapted Kerker canister mufflers to it. Its louder but wont attract the cops if I use a little restraint in town. I tried a 6-1 DG too, wanna buy it?
- Jeff Bennetts
- Posting God
- Posts: 2379
- Joined: Wed Mar 05, 2003 8:38 am
- Location: Ohio, USA
- Location: Ohio, USA
Re: Kerker 6 into 2
If you have the Kerkers with the megaphones this should be a first or 2nd generation original system, both came with a choice of the street and or race baffles, the packing goes around the baffle and is usually attached with safety wire when you re-pack them. The main difference in the baffles is the length, not sure if the diameter is different, been awhile.
Here is a set of 1st generation Kerkers on my 79 back in the day, I ran the street baffle with fresh packing and the bike sounded very good without being too loud.

Here is a set of 1st generation Kerkers on my 79 back in the day, I ran the street baffle with fresh packing and the bike sounded very good without being too loud.

-
- ICOA Member
- Posts: 9378
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Kerker 6 into 2
Cool pic, Jeff
I recognize you on the right and the Barones (?) Who are the others? You remember?


- Jeff Bennetts
- Posting God
- Posts: 2379
- Joined: Wed Mar 05, 2003 8:38 am
- Location: Ohio, USA
- Location: Ohio, USA
Re: Kerker 6 into 2
From left to right, Paul Jasovsky, Mike Brown then, Barone now, Al Blyneberg's wife (can't remeber her name at the moment), Al Blyneberg, Dave Ditner, Me and James Elliot on the end. This picture was taken at the Dragons Tail, Deals Gap, on the newly opened Cherohala Skyway at the lookout during an ICOA CBX rally .
Heres another pic from that rally, how many ICOA members can you identify?

Heres another pic from that rally, how many ICOA members can you identify?

-
- ICOA Membership Director
- Posts: 20
- Joined: Sat Jun 06, 2009 7:37 am
- Location: Knox, PA, USA
- Location: Knox, PA, USA
Re: Kerker 6 into 2
Jeff:
Darlene is the name you're looking for in the photo. That was taken a while ago.
Dave
Darlene is the name you're looking for in the photo. That was taken a while ago.
Dave
- Jeff Bennetts
- Posting God
- Posts: 2379
- Joined: Wed Mar 05, 2003 8:38 am
- Location: Ohio, USA
- Location: Ohio, USA
Re: Kerker 6 into 2
Ya, Darlene, thats it, I think Morganton was the last time I saw the Blynebergs.dcmcmunn wrote:Jeff:
Darlene is the name you're looking for in the photo. That was taken a while ago.
Dave
I'm thinking the pic has to be from 96 or 97, because the Cherohala Skyway had just opened up before we got there and we had the road all to ourselves the whole time we were there.
- bigfish_Oh
- ICOA Member
- Posts: 15
- Joined: Fri Oct 15, 2010 12:48 am
- Location: West Liberty, Ohio, USA
- Location: West Liberty, Ohio, USA
Re: Kerker 6 into 2
I ran a kerker 6 into 2 on my 82. Me and my brother bought a 79 drag bike(1987), he was 3rd in class and as far he he could go on the X, he moved to something else. He wanted the suspension and I wanted the 1268 engine. He decompressed so I could start it. Anyway I had bare baffles and it was bearable for my girlfriend(now wife). I do recall spitting a baffle at someone in the mountains at a rally ride !!
2009 GMC 3500 Duramax CC Dually 4wd
1999 Valkyrie Orange/Black
1957 WD45 Allis Chalmers Grandpa bought new
ICOA #1214
1999 Valkyrie Orange/Black
1957 WD45 Allis Chalmers Grandpa bought new
ICOA #1214
-
- ICOA Technical Director
- Posts: 4751
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Kerker 6 into 2
Larry:
If I'm not mistaken, those were Ontario pipes on your '82, at least when we saw it at the PA rallies. You are for sure right about no baffles - man was it loud!
Dave
If I'm not mistaken, those were Ontario pipes on your '82, at least when we saw it at the PA rallies. You are for sure right about no baffles - man was it loud!
Dave
-
- ICOA Rally Director
- Posts: 1919
- Joined: Wed Sep 03, 2003 3:16 pm
- Location: Lawrencburg, IN
- Location: Lawrenceburg, Indiana
Re: Kerker 6 into 2
Kerker actually made a third type of baffle, called the "Q" for Quiet. It and the street baffle were the same except for length, the competion baffle was short and larger diameter.
I'd love to find a set of the "Q" baffles for an old 6-2 Kerker I bought in a junkyard. I might just have to make a set.
I'd love to find a set of the "Q" baffles for an old 6-2 Kerker I bought in a junkyard. I might just have to make a set.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
-
- ICOA Rally Director
- Posts: 1919
- Joined: Wed Sep 03, 2003 3:16 pm
- Location: Lawrencburg, IN
- Location: Lawrenceburg, Indiana
Re: Kerker 6 into 2
Both of those pics were taken the same day on the Cherohala Skyway. The first was at the eastern end, the larger group photo was up on top at an overlook. Susan and I are on the left, I look like Uncle Fester......
I can name nearly everyone in the big picture. Sheesh, it's been a long time though. Maybe we need to do a re-union ride.
I can name nearly everyone in the big picture. Sheesh, it's been a long time though. Maybe we need to do a re-union ride.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
-
- ICOA Member
- Posts: 207
- Joined: Tue May 18, 2010 9:15 am
- Location: Seaside, Oregon USA
- Location: Seaside, Oregon USA
Re: Kerker 6 into 2
Read this thread and it got me back to the baffles. Does anyone know one from the other? These came on my bike with 115 main jets.
You do not have the required permissions to view the files attached to this post.
ICOA #6266
1979 Honda CBX
2003 Honda Blackbird
2019 Honda CRF450L
2022 Honda Goldwing
1979 Honda CBX
2003 Honda Blackbird
2019 Honda CRF450L
2022 Honda Goldwing