Marving Exhaust

[Crazy Canuck]

Anyone out there have one installed in 2020.....looking for some feedback on fit/finish and sound.

I have an old Kerker system that's rusting out and it needs to be replaced. I do like the look of a 6 into 2 and also like the sound of a louder exhaust, so it seems like Mac and Marving are the only ones out there. I haven't read anything flattering about the Mac but most threads are at least 5 years old, and wondering if any updates have been made on those.
The new factory replicas that are out there just don't do it for me.....to quiet for me.

Any info you can pass on is appreciated.

[daves79x]

The Marving system is well-made, fits good, looks good (very similar to the 750/900F stock system). The sound, however, is not much different/louder than stock, if that's what you're after.

Dave

[AshishNJ]

If you would like another kereker let me know.
I bought it , repacked and cleaned . Sounds great but I decided to go back stock. Occasionally, my wife rides with me and she did not like loud kerker.
Hard to convince her :)

[Crazy Canuck]

If you would like another kereker let me know.
I bought it , repacked and cleaned . Sounds great but I decided to go back stock. Occasionally, my wife rides with me and she did not like loud kerker.
Hard to convince her :)

Could you send some pics of it including the worst spot on the whole system....pm if you like.

[AshishNJ]

Ok. Do you have an email I could use ? Easier to send pictures

[Crazy Canuck]

forrestmillerca at g mail dot com

[AshishNJ]

Will send you some pictures

[Gsxrfun]

We buyed new complete exhaust Marving for CBX1000 CB1 and when I was wants put on motorbike than I must exhaust cutting because exhaust did not go to install!! I wanted to complain but Marving he didn't even want to hear about it. Terible situation and communication with Marving.
He didn't go to install and he didn't even go to press the brake pedal. We had to cut the leads and re-weld and patch everything. I cannot recommend Marving enough

[daves79x]

That's certainly different than my experience. The couple of Marving systems I've fitted went on perfectly fine.

Dave