Fuel petcock replacement

Post Reply
pipeguy
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 14
Joined: Wed Jun 13, 2018 11:20 pm
Location: Ontario
Location: Ontario

Fuel petcock replacement

Post by pipeguy »

Hi all, tried to some searches online and on forum and came up empty handed, is there no other Honda model that shares the same petcock as the 1980 CBX? Called Honda today and they told me no parts or whole thing!! thanks in advance, Fred.
Cheers, Fred :P

-------------------------------------------------------

1980 CBX
1973 CB750 K3 (waiting...)
1970 CB750 K0
2001 Electraglide
2006 KTM SF-X 250

User avatar
desertrefugee
ICOA Member
ICOA Member
Posts: 177
Joined: Fri Mar 16, 2018 1:50 pm
Location: Chandler, AZ
Location: Chandler, AZ

Re: Fuel petcock replacement

Post by desertrefugee »

Rebuild kits are readily available. My 10 year sleeper leaked like a sieve. I drilled out the rivets and put a kit into it, but put it on the shelf and replaced it with a Pingel.

“Pass more gas” as they say...
'86 VMax, ‘83 ZN1300-6, ‘78 GL1000, '75 750K

"The older I get, the more I understand. Don't let the fear of what could happen make nothing happen." - Anonymous

Rocker81
ICOA Member
ICOA Member
Posts: 26
Joined: Fri Aug 19, 2016 9:26 am
Location: DeLand, Florida. USA
Location: DeLand, Florida. USA

Re: Fuel petcock replacement

Post by Rocker81 »

put a Pingle on mine too. works great.. no more leaks.
PAST:
75 Kaw 900 Z1 drag and street bike
82 Kaw GPZ 1100
85 HD Low rider (1st Hawg)
83 Kaw GPZ 750 Turbo
93 Kaw ZX1100
96 HD Standard Bagger, 96" Stroker with Nitrous 125 hp
02 BMW K1200LTC
04 Triumph Rocket III 140 hp
05 Triumph Rocket III Classic
09 HD Standard now custom Street Glide
10 Triumph Bonneville Café Type
NOW:
2018 HD Road Glide Special
79 Honda GW 1000 naked museum bike.
81 Honda CBX had Zero Miles, in storage since new, serviced and am now riding, and loving it.

Rick Pope
ICOA Rally Director
ICOA Rally Director
Posts: 2311
Joined: Wed Sep 03, 2003 3:16 pm
Location: Lawrencburg, IN
Location: Lawrenceburg, Indiana

Re: Fuel petcock replacement

Post by Rick Pope »

Most older Hondas used the same rubber "biscuit" as the CBX. Just drill out the rivets and tap the holes for small screws. Way cheaper than a Pingel, and it will flow more gas than a stock bike can use.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4099
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Fuel petcock replacement

Post by steve murdoch icoa #5322 »

'79, '80', '81 all had the same petcock
Have a look at a rebuild post from Randakks.
http://www.randakksblog.com/petcock-reb ... ro-update/

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4877
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Fuel petcock replacement

Post by daves79x »

Well, almost. The '79 petcock had a 1/4 inch outlet and a longer standpipe for reserve, which took a '79-only screen. You can run without the screen but you need the o-ring. The '80-'81 petcock had a 5/16 outlet and a different reserve standpipe. That screen kit is still available for about $40. Most all NOS petcocks you find now are the 469 part number. It is really hard to get an old screen out of the tank without ruining it. But any of the above can be rebuilt to work find as mentioned previously.

Dave

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”