What was the factory setup for the carb intake boot clips? Mine has 1 and 6 both screws on the bottom and others one screw top and one bottom.
Would assume that clip screws should be together all same way???
Carb intake boot clips.
-
- Forum Regular
- Posts: 113
- Joined: Sat Mar 24, 2018 2:55 am
- Location: Brisbane, Australia
- Location: Brisbane, Australia
-
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2295
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: Carb intake boot clips.
While I don't know if there is a 'factory' orientation, I would suggest you just orient them to give you best access after everything is buttoned up. That way, you can check for tightness some time later.
Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
- ICOA Member
- Posts: 4099
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Carb intake boot clips.
Have a read through this thread about the clamps and after your head stops spinning the "orientation" should become clear.
viewtopic.php?f=20&t=6957
viewtopic.php?f=20&t=6957
-
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2295
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: Carb intake boot clips.
Read through that thread/post, Steve. Made my day. I realize it was all very sincere. However, all I could think was ---- Who's on First??!
Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
- ICOA Member
- Posts: 4099
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Carb intake boot clips.
Great minds, Larry.
I was thinking the exact same thing.
I was thinking the exact same thing.