Hi Hound Dog,
Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.
PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.
Cheer...Tony
Cold Cylinders x 2
-
herdygerdy
- Power Poster
- Posts: 266
- Joined: Fri Nov 22, 2013 9:48 pm
- Location: Sydney, Australia
- Location: Sydney, Australia
-
Hound_Dog
- New Member & Happy To Be Here
- Posts: 18
- Joined: Sat Aug 08, 2015 10:46 pm
- Location: Sydney
- Location: Sydney
Re: Cold Cylinders x 2
herdygerdy wrote:Hi Hound Dog,
Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.
PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.
Cheer...Tony
Tony you have a PM mate.
-
Larry Zimmer
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2295
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: Cold Cylinders x 2
Great!! 
That's what makes this thing tick.
That's what makes this thing tick.Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
geebee58
- ICOA Member
- Posts: 11
- Joined: Fri Dec 25, 2015 8:50 pm
- Location: Lammermoor, Queensland
- Location: Lammermoor, Queensland
Re: Cold Cylinders x 2
Hi Hound Dog,
What was the go in the end? Guessing it ended up being electrical?
Cheers,
Gary
What was the go in the end? Guessing it ended up being electrical?
Cheers,
Gary
-
herdygerdy
- Power Poster
- Posts: 266
- Joined: Fri Nov 22, 2013 9:48 pm
- Location: Sydney, Australia
- Location: Sydney, Australia
Re: Cold Cylinders x 2
Hi Hound Dog,Hound_Dog wrote:herdygerdy wrote:Hi Hound Dog,
Whereabouts in Sydney are you? I am pretty sure I can help, but will be out of town for the early part of this week. I am in the Inner West.
PM me your details and I am confident that together we can get this sorted for you quick smart, even if it means taking parts off mine to help isolate your problem.
Cheer...Tony
Tony you have a PM mate.
I don't think I ever got your pm... (Or am I having a 'Senior's moment'?). Holler if you still need help.
Cheers...Tony
-
herdygerdy
- Power Poster
- Posts: 266
- Joined: Fri Nov 22, 2013 9:48 pm
- Location: Sydney, Australia
- Location: Sydney, Australia
Re: Cold Cylinders x 2
Hey Hound Dog,
Where about in Sydney are you? I am in the Inner West and would be happy to help out if you need it.
While you are faffin' about with your ignition, strongly recommend installation of an ignition coil relay. This easy mod feeds 12v direct from battery straight into the coils. I tested a friends one on the weekend and with the stock setup there was a 2 volt drop between battery and ignition coils.
Send me a pm and I'll be happy to help you out with all manner of things CBX incl. carb balance, valve clearances etc.
Cheers...Tony
Where about in Sydney are you? I am in the Inner West and would be happy to help out if you need it.
While you are faffin' about with your ignition, strongly recommend installation of an ignition coil relay. This easy mod feeds 12v direct from battery straight into the coils. I tested a friends one on the weekend and with the stock setup there was a 2 volt drop between battery and ignition coils.
Send me a pm and I'll be happy to help you out with all manner of things CBX incl. carb balance, valve clearances etc.
Cheers...Tony
-
Caley-Thistle
- New Member & Happy To Be Here
- Posts: 8
- Joined: Sun Oct 03, 2010 9:33 am
- Location: Elgin, Scotland
- Location: Elgin, Scotland
Re: Cold Cylinders x 2
And the solution was?