Any know where I might find an 81 rear master cylinder pushrod (pn 43530-461-771)? My pushrod is beyond salvage. Appears they are I longer avialible from Honda. Any help would be appreicated
Ted
81 rear brake master cylinder pushrod
-
- ICOA Member
- Posts: 3
- Joined: Fri Oct 21, 2016 12:23 am
- Location: Breaux Bridge
- Location: Breaux Bridge
-
- ICOA Member
- Posts: 714
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: 81 rear brake master cylinder pushrod
They come the rebuild kits. I use k&l aftermarket kit.
-
- ICOA Member
- Posts: 3
- Joined: Fri Oct 21, 2016 12:23 am
- Location: Breaux Bridge
- Location: Breaux Bridge
Re: 81 rear brake master cylinder pushrod
Thanks I will check them out!
-
- ICOA Member
- Posts: 3
- Joined: Fri Oct 21, 2016 12:23 am
- Location: Breaux Bridge
- Location: Breaux Bridge
Re: 81 rear brake master cylinder pushrod
Hey Taven, I was looking at your bike,what kind of exhaust system do you have? Have not got that far on my project yet. But I am gathering opinions.
Thanks Ted
Thanks Ted
-
- ICOA Member
- Posts: 714
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: 81 rear brake master cylinder pushrod
That is actually a stock exhaust that was cut off at the weld seam10 or so inches from the end. Previous owner did it.