On the 82, how do you remove the lock set on the saddle bag bracket. I am changing out a bent bracket. I know there is a trick to it, but for the life of me I can not remember how to do it.
Damn I am getting OLD.
Got another ?
-
rippper43
- Forum Regular
- Posts: 91
- Joined: Tue Aug 03, 2010 5:59 am
- Location: Horton, Kansas, USA
- Location: Horton, Kansas, USA
Got another ?
White is right...
-
daves79x
- ICOA Technical Director
- Posts: 4891
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Got another ?
There are screws with no heads on the underside of the bracket. You'll need to use Vise-Grips or similar and then install regular screws or order the special break-away ones from Honda.
Dave
Dave
-
rippper43
- Forum Regular
- Posts: 91
- Joined: Tue Aug 03, 2010 5:59 am
- Location: Horton, Kansas, USA
- Location: Horton, Kansas, USA
Re: Got another ?
daves79x wrote:There are screws with no heads on the underside of the bracket. You'll need to use Vise-Grips or similar and then install regular screws or order the special break-away ones from Honda.
Dave
I just cut the heads off the bolts and now that I have the lock off, I can see there is no trick to getting them off other than death grips or cutting them off as I did.
thanks for the advice.
White is right...