Hello ICOA,
This is my first post so go easy on me....anyone have first hand experience with this exhaust, any better than a pipemaster or Schuele? Assuming it's much lighter, but was more interested in the performance. They make some big claims with the FCR carbs....any thoughts would be greatly appreciated.
http://www.phildentonengineering.com/pr ... sp?pid=895
Titanium exhaust
* Releases far more power than any other after market system currently available
* Used with Bito R&D FCR carburettor set will add 30 plus BHP! With careful cylinder head porting and polishing this can can be up to 40 BHP!
* Saves approx 12 kilos in weight!
Code: 200-03-404
Price: £2,420.00
Bito R&D all titanium exhausts system. Helps release much more power due to superior extractor effect. When combined with Bito R&D carburettor set and careful engine preparation 40 plus BHP can be added giving modern levels of super bike performance.
Using the standard CBX chassis/brake set up is not advisable unless great care is observed! Please note this exhaust saves approx 12 kilos in weight compaired to the standard original, add this to the magnesium wheels and save another 20 plus Kilos. Total 32Kilos (70Ibs if you are from the U.K or USA).
Titanium Bito 6-1 exhaust
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Tue Jun 01, 2010 9:30 pm
- Location: Los Angeles
- Location: Los Angeles, CA
- NobleHops
- ICOA Member
- Posts: 3876
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Re: Titanium Bito 6-1 exhaust
Hey Jason, welcome to the site!coulisnosaj wrote:Hello ICOA,
This is my first post so go easy on me....anyone have first hand experience with this exhaust, any better than a pipemaster or Schuele? Assuming it's much lighter, but was more interested in the performance. They make some big claims with the FCR carbs....any thoughts would be greatly appreciated.
http://www.phildentonengineering.com/pr ... sp?pid=895
CBXMEL on this site is the president of the UK CBX club. If none of the usual suspects here has an opinion, it's a safe bet he does. Go ahead and PM him is my suggestion.
N.
Nils Menten
Tucson, Arizona, USA
'82 CBX, among others.
Tucson, Arizona, USA
'82 CBX, among others.
-
- ICOA Member
- Posts: 3931
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Titanium Bito 6-1 exhaust
Welcome to the site, Jason.
Sorry, no info on the Denton system
Are you still running the Scheule? Any down side to it?
Sorry, no info on the Denton system
Are you still running the Scheule? Any down side to it?
- zxbob
- Power Poster
- Posts: 313
- Joined: Sun May 09, 2010 8:08 am
- Location: Smug - Ca.
- Location: "Smug" - California
Re: Titanium Bito 6-1 exhaust
Nize pipe . . . . but it'll take a few of these

Bob

Bob
Good parts aint cheap ~ and cheap parts aint good !
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Tue Jun 01, 2010 9:30 pm
- Location: Los Angeles
- Location: Los Angeles, CA
Re: Titanium Bito 6-1 exhaust
you ain't kiddin!!!