No fuel at carb no5

Post Reply
ktgreaves
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 1
Joined: Tue May 11, 2010 4:01 pm
Location: Birmingham, England
Location: Birmingham, England

No fuel at carb no5

Post by ktgreaves »

Since a winter lay off my 79 cbx is not running smooth.After new plugs i traced the fault to carb no5 as the new spark plug was clean compared to all the others ,with the plug out and still attached to the plug lead it is firing ok as there is a healthy spark so the fuel must not be getting through is there anything i am missing and is there a simple way to unblock the carb without dropping the engine.

User avatar
Carl
Power Poster
Power Poster
Posts: 263
Joined: Tue Mar 04, 2003 8:07 pm
Location: Not Far From Orange County Choppers
Location: Not Far From Orange County Choppers

Re: No fuel at carb no5

Post by Carl »

Welcome to the site....I'm sure that "daves79x" will be able to help you
Say It Loud.....I Own a CBX and I'm Proud!!

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: No fuel at carb no5

Post by EMS »

Some people swear by, and have supposedly been successful with Yamaha Carb Cleaner or Seafoam mixed to the fuel and running a tank full, or so, through the engine. I have not been that lucky myself and am currently working on the carbs off the engine on both the 79 and the 80.

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3917
Joined: Mon Jan 25, 2010 7:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: No fuel at carb no5

Post by NobleHops »

Yes KT, welcome for sure. ISTR that Mike Nixon had detailed an 'on bike' cleaning method...

Yes. Here: http://www.motorcycleproject.com/motorc ... short.html

If that doesn't do it you're gonna obviously have to tilt the moor and get them off, but as a noob that did it for the first time last year, it sounds a lot worse than it is.

Check out Mike's site and let us know how it goes. If you ask you'll get help here, and these guys know this stuff inside out and backwards, particularly Dave and Mike who both clean and rebuild these for fun and profit. You'll find that both are more than generous with their knowledge and experience.

N.
Nils Menten
Tucson, Arizona, USA
'82 CBX, among others.

User avatar
Jeff Bennetts
Posting God
Posting God
Posts: 2490
Joined: Wed Mar 05, 2003 8:38 am
Location: Ohio, USA
Location: Ohio, USA

Re: No fuel at carb no5

Post by Jeff Bennetts »

EMS wrote:Some people swear by, and have supposedly been successful with Yamaha Carb Cleaner or Seafoam mixed to the fuel and running a tank full, or so, through the engine. I have not been that lucky myself and am currently working on the carbs off the engine on both the 79 and the 80.

DON'T EVER use Yamaha carb cleaner in the tank, it will melt the plastic fuel strainer in the tank, follow the directions and always pour the mixture of gas and Yamaha carb cleaner directly into the carbs through the carb inlet.

RC166LVR
Forum Regular
Forum Regular
Posts: 27
Joined: Sat Nov 15, 2003 6:20 pm

Re: No fuel at carb no5

Post by RC166LVR »

Why not?

This product is designed to be run through the fuel systems of either 2 or 4 stroke engines and some of them must have plastic bits in their fuel systems. The instructions don't say pour it into the inlets, it only says pour X amount per gallon of fuel into the fuel tank and run the engine.

Confused in San Antonio.
G.Dunham

San Antonio, Tx

User avatar
Jeff Bennetts
Posting God
Posting God
Posts: 2490
Joined: Wed Mar 05, 2003 8:38 am
Location: Ohio, USA
Location: Ohio, USA

Re: No fuel at carb no5

Post by Jeff Bennetts »

RC166LVR wrote:Why not?

This product is designed to be run through the fuel systems of either 2 or 4 stroke engines and some of them must have plastic bits in their fuel systems. The instructions don't say pour it into the inlets, it only says pour X amount per gallon of fuel into the fuel tank and run the engine.

Confused in San Antonio.
I'm not sure what your confused about, If you are holding a bottle of Yamaha carb cleaner, part# ACC-CARBC-LE, it says right on the lable in the directions, the last sentence in step #3 in BOLD PRINT, "DO NOT PUT IN FUEL TANK".

Yamaha carb cleaner is not ment to be consumed and combusted in either a 2 or 4 stroke motor.

RC166LVR
Forum Regular
Forum Regular
Posts: 27
Joined: Sat Nov 15, 2003 6:20 pm

Re: No fuel at carb no5

Post by RC166LVR »

Sorry.
My bad.
I thought you were referring to the Yamalube Ring Free Fuel Additive. :oops:

Which BTW, quickly cleaned up a low circuit lack of fuel into the #1 carb and now the old girl runs better than she has in the past few years.
G.Dunham

San Antonio, Tx

User avatar
Jeff Bennetts
Posting God
Posting God
Posts: 2490
Joined: Wed Mar 05, 2003 8:38 am
Location: Ohio, USA
Location: Ohio, USA

Re: No fuel at carb no5

Post by Jeff Bennetts »

Glad you got it going with the Yamalube additive, much easier than pulling the carbs. :bigthumb:

RC166LVR
Forum Regular
Forum Regular
Posts: 27
Joined: Sat Nov 15, 2003 6:20 pm

Re: No fuel at carb no5

Post by RC166LVR »

Amen, brother. :D

Anyone with any seat of the pants experience with the Yamalube Ring Free additive vs Sea Foam vs Techron for that annoying carb gumming (even if you keep Stabil in the thing always)?

I've come to the same conclusion as the CBX gurus and others on this forum - the CBX responds (like lots of things) well to regular exercise.
G.Dunham

San Antonio, Tx

User avatar
alimey4u2
ICOA Web Video Director
ICOA Web Video Director
Posts: 5093
Joined: Fri Aug 11, 2006 1:03 pm
Location: Uphill, WsM, United Kingdom

Re: No fuel at carb no5

Post by alimey4u2 »

CBX motors love to run, run her hard, feed her well with top quality fuel & oil & you'll think she's running for the roses... :wink: Leave her idle (without preparation) for a long time & she will spank you like a whip cracking porn star ... :D
ICOA # 656

RC166LVR
Forum Regular
Forum Regular
Posts: 27
Joined: Sat Nov 15, 2003 6:20 pm

Re: No fuel at carb no5

Post by RC166LVR »

Couldn't agree more, but I relied on Stabil and a battery tender and only rode her every 3-4 months, much to my chagrin.

I now know that I'd rather pile on the miles and enjoy the old girl running as she should, than deal with results of my own neglect.
She ran so well this weekend (150 miles in the Texas Hill Country), I fell in love all over again. Very few bikes out there with the feel and character of the CBX.

Long live Iramajiri-san's creation !!!
G.Dunham

San Antonio, Tx

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”