Fairing Guages P/Ns needed.

Post Reply
Jim-Jim
ICOA Member
ICOA Member
Posts: 178
Joined: Sun Mar 02, 2003 11:07 pm
Location: San Diego, CA
Location: San Diego, CA

Fairing Guages P/Ns needed.

Post by Jim-Jim »

Can anyone provide me with the Part Numbers for the guages located in the Fairing; the Altimeter, the Clock, and the Temp? They are not listed in the 81/82 parts catalog and I suspect they were offered through the Hondaline accessories but no one has any literature going that far back and I cannot track the P/Ns down :( . Thanks in advance.

User avatar
Mike Nixon
ICOA Member
ICOA Member
Posts: 378
Joined: Thu Aug 14, 2003 10:52 pm
Location: Prescott, AS
Location: Prescott, AZ
Contact:

gauges

Post by Mike Nixon »

Jim -- see my reply on the other board. I assume you want the redface ones. Yes, they were Hondaline, and available in both whiteface (for the SilverWing and GoldWing) and redface (originally for the Euro 900F then available for the CBX).

Post Reply

Return to “X ...OTHER TECHNICAL: Won't Run, Centerstands, Chains, Fairings, Tanks, Gauges, Petcocks, Seats, Turn Signals, etc.”