Oil pan question...

steve murdoch icoa #5322 · Sun Feb 10, 2008 1:47 pm

I recently read in a post about reversing the oil pan cover so the drain plug is towards the rear of the engine.
I have a Marshall[Jama] 6-1 that blocks access to the oil drain plug.
Is this doable?
Is this another one of the hundred things about the CBX that everybody knows but me?

SteveG · Post by **SteveG** » Tue Jan 27, 2009 6:30 pm

Found this question while searching for other info. I recently dropped my oil pan and the inside has ribs / diverters / pockets that trap gunk and debris away from the screen and toward the drain hole. I don't know how these "pockets" line up with what is above (pick up screen).

Steve

alimey4u2 · Post by **alimey4u2** » Tue Jan 27, 2009 7:02 pm

Good find Steve, without checking I would concur with your thoughts....

EMS · Post by **EMS** » Tue Jan 27, 2009 7:08 pm

I don't think the pickup/screen is located in the center of the pan. It will most likely not line up with the baffle rib and the three protrusions if you turn the pan around. Physically, it can be done, but if it works properly...I don't know

cbxtacy · Post by **cbxtacy** » Tue Jan 27, 2009 7:18 pm

Get a spare pan, weld a bung in the rear of it for a drain plug, get a patent on the idea, go into business producing CBX oil pan's with re-located drain holes, retire to Key West and buy a deap sea fishing boat with the profits and invite all your CBX owning friends down for a Marlin tournament. Yes I live in California and drink the water.

alimey4u2 · Post by **alimey4u2** » Tue Jan 27, 2009 7:21 pm

I still have my deep sea rods ( up in the attic.) Sounds like a plan to me...

cbxtacy · Post by **cbxtacy** » Tue Jan 27, 2009 7:23 pm

Got one I can borrow, Larry?

alimey4u2 · Post by **alimey4u2** » Tue Jan 27, 2009 7:25 pm

cbxtacy wrote:Got one I can borrow, Larry?

Sure George, I'll even bait it for you....

cbxtacy · Post by **cbxtacy** » Tue Jan 27, 2009 7:26 pm

I've heard you're a Master Baiter, Larry.

EMS · Post by **EMS** » Tue Jan 27, 2009 7:26 pm

I don't think that the profits from 10,000 or so modified CBX oil pans will buy any real estate in Key West. Not even in the current market ....then again, if a used CBX is worth $16,000.- a good oil pan should be at least $800.- , shouldn't it

Sales of $8 Million, total cost of $500,000.- , taxes of $2.6 Million...that could work....

alimey4u2 · Post by **alimey4u2** » Tue Jan 27, 2009 7:28 pm

cbxtacy wrote:I've heard you're a Master Baiter, Larry.

Dammitt George you stole my return repartee....

cbxtacy · Post by **cbxtacy** » Tue Jan 27, 2009 7:30 pm

and I beat EMS to the reply

EMS · Post by **EMS** » Tue Jan 27, 2009 7:30 pm

You guys have been warned before!!! You better behave!

cbxtacy · Post by **cbxtacy** » Tue Jan 27, 2009 7:31 pm

we are

alimey4u2 · Post by **alimey4u2** » Tue Jan 27, 2009 7:32 pm

OK OK, I better go to bed...Night all....