Removing cases, replacing indicators

Post Reply
jackstraw
Forum Regular
Forum Regular
Posts: 29
Joined: Wed Oct 01, 2014 8:39 am
Location: Kent, England
Location: Kent, England

Removing cases, replacing indicators

Post by jackstraw »

I have a CBX-C with Honda cases/panniers. I’d like to remove the cases/ panniers and brackets which would also remove the indicators.
Does anyone know how I can fit the indicators without the cases/pannier brackets?

JoeInTUS
Forum Regular
Forum Regular
Posts: 139
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Removing cases, replacing indicators

Post by JoeInTUS »

You need the turn signal relocation kit. Tim’s CBX sells it. There may be other sources.
IMG_0256.jpeg
You do not have the required permissions to view the files attached to this post.
Joe S
Tucson, AZ

JoeInTUS
Forum Regular
Forum Regular
Posts: 139
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Removing cases, replacing indicators

Post by JoeInTUS »

Looks like this installed.
IMG_0258.jpeg
You do not have the required permissions to view the files attached to this post.
Joe S
Tucson, AZ

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4876
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Removing cases, replacing indicators

Post by daves79x »

TIMS kit is good. Honda actually made a turn signal relocation kit for these. Hard to find, but there is one listed right now on eBay. Astroracer is the seller, a long-time CBX owner.

Dave

CBX-tras
ICOA Member
ICOA Member
Posts: 460
Joined: Tue Feb 16, 2010 1:29 pm
Location: Clinton Twp, Michigan
Location: Clinton Twp., Michigan, USA

Re: Removing cases, replacing indicators

Post by CBX-tras »

Although not the best looking lamps, they cover up the hole with no damage to the bodywork, easily reversed if need be.

Flush mount, fabricate your own attachment.
You do not have the required permissions to view the files attached to this post.

jackstraw
Forum Regular
Forum Regular
Posts: 29
Joined: Wed Oct 01, 2014 8:39 am
Location: Kent, England
Location: Kent, England

Re: Removing cases, replacing indicators

Post by jackstraw »

JoeInTUS wrote:
Tue Aug 29, 2023 12:58 pm
You need the turn signal relocation kit. Tim’s CBX sells it. There may be other sources.

IMG_0256.jpeg
Brilliant, just what I wanted. I’ll get on and order the kit from TimsCBX
Thanks Joe

CBX-tras
ICOA Member
ICOA Member
Posts: 460
Joined: Tue Feb 16, 2010 1:29 pm
Location: Clinton Twp, Michigan
Location: Clinton Twp., Michigan, USA

Re: Removing cases, replacing indicators

Post by CBX-tras »

If the Tim's kit is made of aluminum, they will eventually bend from the weight of the lamp when the bike goes over bumps.

The Honda parts were made of steel.

Post Reply

Return to “X ...OTHER TECHNICAL: Won't Run, Centerstands, Chains, Fairings, Tanks, Gauges, Petcocks, Seats, Turn Signals, etc.”