Hi,
Can any one tell me if the frame # ccb1-2002328 D.O.P is 4/78 is a good # and how low is it in production is it? Thanks Kevin
Frame #
-
- ICOA Member
- Posts: 2306
- Joined: Thu Jan 30, 2003 9:45 pm
- Location: norcal
- Location: Northern California, USA
My 79 is a pretty early production unit with a VIN ending in 5074 so your's is 2,746 units older (earlier) than mine is. I forget the manufacturing date but it was first sold in 4/79. Do you know if you have a similarly numbered motor, the one that came with the frame? Does it have smooth or spiraled studs on it? My motor number is 2005139, 65 numbers from the VIN but the motor number is still way back on the motor, under the airbox and almost impossible to see (early production). Later motors had their number stamped right behind the cylinders on the right side, much easier to find. Honda pulled quite a few motors off the production line as test mules so getting a motor that's really close to your VIN is a rare occurrence.
It ain't the destination, its the journey...
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
CB1-20 02328 is a good number. However, considering that April 78 was the first production month of the CBX, I am slightly skeptical that the two go together. I may be wrong, however. Someone with another low number or a 4/78 production date would have to chime in.
The motor numbers didn't migrate from the primary cover to behind the cylinders until into the 17,000s
The motor numbers didn't migrate from the primary cover to behind the cylinders until into the 17,000s
Last edited by EMS on Wed Nov 25, 2009 4:37 pm, edited 1 time in total.