Will a '79 fuel tank fit an '81 frame?

Post Reply
BayArchitect
Forum Regular
Forum Regular
Posts: 63
Joined: Wed Oct 11, 2006 7:10 pm
Location: Los Gatos, CA
Location: Los Gatos, CA

Will a '79 fuel tank fit an '81 frame?

Post by BayArchitect »

I need a damaged tank to fit an '81 frame, but the bottom needs to be good. I'll cut out the bottom and fit it to a custom tank for the CBX project. When I'm done I'll publish the results on this site. I don't know if a '79/'80 tank will fit the '81/'82 frame. If you know, please tell me.
Regards,
Leon Summers
Top
daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4891
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Post by daves79x »

Leon:
Yes, an early tank will bolt right up to the late model. It's the seat conversion that's a little more work, but you can figure that out.

Dave
Top
User avatar
cbxtacy
Posting God
Posting God
Posts: 2543
Joined: Sun Aug 29, 2004 4:22 am
Location: San Diego, California, USA
Location: San Diego, California, USA

Post by cbxtacy »

I have a late model tank in San Diego you're welcome to. It's good.
one out of four people in this country is mentally unbalanced
think of your three closest friends, if they're okay then
YOU'RE THE ONE
Top
User avatar
Ringnalda
ICOA Staff
ICOA Staff
Posts: 560
Joined: Sat Oct 25, 2003 11:47 am
Location: Columbus, OH
Location: Cruzin at 35,000ft...

Well... Perhaps

Post by Ringnalda »

Early '79 CBX tanks did not have the slot cut out in the locating tabs, so you may have to exercise a dremel or a hacksaw to make it fit....
Good judgement comes from experience. Experience comes from bad judgement.
Top
Post Reply

Return to “X ...OTHER TECHNICAL: Won't Run, Centerstands, Chains, Fairings, Tanks, Gauges, Petcocks, Seats, Turn Signals, etc.”