The International CBX Owners Association

PostPosted: Thu Aug 18, 2016 1:03 am Reply with quote Edit/Delete this post Back to top Delete this post
My brother wanted to get set up to change tires and since I had already gone through this whole ordeal I made a vid of my entire setup.

I go through and do a tire change on my CB1100F gold boomerang without adding any scratches. The equipment works great but I am just an amateur and don't change tires all that often, so I lack the grace you would see in a professional.

https://www.youtube.com/watch?v=aP-PQILeCZc

Harbor Freight Items used

Motorcycle tire attachment (note, I welded a plate to the bottom and bolted it to my milling machine table, it is supposed to mount on the harbor freight tire changer for cars)

http://www.harborfreight.com/motorcycle ... 60810.html

Bead Breaker (I use this for both cars and motorcycles, handy tool)

http://www.harborfreight.com/bead-breaker-92961.html

Wheel balancer (not in vid but needed, unless you use dynabeads)

http://www.harborfreight.com/motorcycle ... 98488.html

No Mar items

Tire Lube (required, mounting is no fun without LUBE!)

http://www.nomartirechanger.com/Tire_Lu ... -paste.htm

Grip Spools (to grab the rim)

http://www.nomartirechanger.com/Standar ... andard.htm

Demount tips (pop it in the end of a piece of 3/4" pipe)

http://www.nomartirechanger.com/Demount ... p-dt3b.htm

Mount Tips (made my own mounting bar)

http://www.nomartirechanger.com/Mount_T ... p-mt2b.htm

Yellow thing (life saver)

http://www.nomartirechanger.com/YellowT ... wthing.htm

Thank, ya, Colonel. Good demo