The International CBX Owners Association

Hi,
I have a leaking main pet cock and need to find the rubber seal inside. It is a 1981 Prolink and I have already drilled the rivets, taken it apart and made new threads for re-assembly.
The soze of the seal inside is (sorry for going metric on you) 22mm outer diameter, 4 holes with diameter 6mm and it is 3mm thick. If anybody can point me in the right direction, or have another tip on how to solve this I would appreciate it.
Happy CBX riding through 2015!

Carl-Hugo

Hallo Carl-Hugo:

Offiziell gab es die Dichtung von Honda nicht als E-Teil für die CBX. Wenn ich mich recht erinnere, paßt aber Teile-Nr 16955-268-020.
Original für CB72, 250cc aus den Sechzigern und wurde auch bei Honda CB350F F0-F1 , Honda CB500 K0-K2, Honda CB550 K0 , Honda CB750 K0-K4 1969-74 ,Honda GL1000 1975-76 verwendet.

Maybe someone who has done this can chime in and confirm that this is the right part.

Thank you for super quick answer, found it on ebay and it looks right from the pictures. I have asked them for a measurement just to be sure.

I will let you know how it works out.

Carl-Hugo

Hi,
I got my seal from Honda today, 16955-268-020, this fits perfectly on my PL from 1981.
Thank you for your help.

Carl-Hugo

Thank you very much for reporting back on the success of your inquiry. I wish this was a regular thing for people to do. It is nice for everybody who tries to help to hear about how something works out