Hi Everyone,
Looking at just cleaning up some of the bits and pieces on the bike around the handlebars. Stuff like cable brackets, gauge cluster facia and things like that. I don't have spray equipment so would be thinking about using rattle cans. Is there a know product that suits? I'm guessing VHT engine paint is a no go
Also is there an alternative to powder coating brake calipers and master cylinders? Preferably out of a spray can too.... Not asking much eh...
Cheers
Gary
painting black bits (not engine or brake calipers)
-
- ICOA Member
- Posts: 11
- Joined: Fri Dec 25, 2015 8:50 pm
- Location: Lammermoor, Queensland
- Location: Lammermoor, Queensland
-
- ICOA Technical Director
- Posts: 4755
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: painting black bits (not engine or brake calipers)
Don't know what brands you get over there, but most paint makers offer several kinds of 'trim black'. It will be the correct satin finish. Don't get one that's too 'flat'. There are correct caliper paints available too, in rattle cans.
Dave
Dave
-
- ICOA Member
- Posts: 11
- Joined: Fri Dec 25, 2015 8:50 pm
- Location: Lammermoor, Queensland
- Location: Lammermoor, Queensland
Re: painting black bits (not engine or brake calipers)
Once again, Thanks Daves79x. Appreciate your time and help.
Cheers, Gary B
Cheers, Gary B