Page 1 of 1

1980 Rear cowl lid alignment

Posted: Mon Mar 26, 2018 3:10 pm
by toybldr
The lid is sitting about 1/8 inch too far back and there isn't enough adjustment within the 3 lid screws to pull it forward. Can the spring mount bracket be bent?
TIA

Re: 1980 Rear cowl lid alignment

Posted: Tue Mar 27, 2018 6:55 am
by daves79x
Many don’t fit very well. Yes you can bend the hinge to try to get it better, but be careful.

Dave