Took the 2 rubber splash guards guard L and R off, and the grommets holding them on to inner rear fender were pretty hard (plug, splash guard setting, part number 80111-MA2-300), and they all broke even after applying some armour-all to help slide them out.
Any one know where I can get 6 of these little guys. I can't be the first person to look for these. Here's a pic.
Mud guard plug
-
- ICOA Member
- Posts: 135
- Joined: Mon Nov 20, 2017 9:40 am
- Location: Waterloo, Ontario, Canada
Mud guard plug
You do not have the required permissions to view the files attached to this post.
-
- ICOA Member
- Posts: 4099
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Mud guard plug
I would contact site member Tevan, he might have what you are looking for.
Certainly Louis at https://www.usedcbxparts.com/ would have them.
Have you tried Honda?
Certainly Louis at https://www.usedcbxparts.com/ would have them.
Have you tried Honda?
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Mud guard plug
Available new from CMSNL in the Netherlands for 2 Euro/pc Shipping cannot be that much for the small parts.
https://www.cmsnl.com/products/plugmudg ... 6f1_1qSmUk
https://www.cmsnl.com/products/plugmudg ... 6f1_1qSmUk
-
- ICOA Member
- Posts: 135
- Joined: Mon Nov 20, 2017 9:40 am
- Location: Waterloo, Ontario, Canada
Re: Mud guard plug
Thanks for this, appreciate it.
-
- ICOA Member
- Posts: 135
- Joined: Mon Nov 20, 2017 9:40 am
- Location: Waterloo, Ontario, Canada
Re: Mud guard plug
Yes, checked with Honda, but not available, Will check out other sources mentioned above.
-
- ICOA Member
- Posts: 135
- Joined: Mon Nov 20, 2017 9:40 am
- Location: Waterloo, Ontario, Canada
Re: Mud guard plug
As suggested got them from CMSNL