How to: Restore your carburetor insulators and rubber bits
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: How to: Restore your carburetor insulators and rubber bi
Copy that Dave. Thank you. I tried Acetone; just cleans REAL NICE. Next up was PVC primer and "glue". No softening observed. Last was classic Super Glue. Some tack, but no significant bond after 15 minutes (like when I get it between two fingers)... Might go towards Dave's recommendation. Going to look into roofing adhesive. Stand by...
/r
B
/r
B
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: How to: Restore your carburetor insulators and rubber bi
Still searching for an adhesive for the plenum box. Learning more about plastics than I ever thought I wanted to. Some really good info here if you have time for a read: http://www.henkelna.com/us/content_data ... 756739.pdf
Seems the assembly may be made from a "hard to bond substrate" type of plastic referred to as "TPV" or thermoplastic vulcanizate. Now to find an adhesive.
/r
Brad
Seems the assembly may be made from a "hard to bond substrate" type of plastic referred to as "TPV" or thermoplastic vulcanizate. Now to find an adhesive.
/r
Brad
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: How to: Restore your carburetor insulators and rubber bi
Here's one candidate. About $80 to the door with 35ml glue, mixing nozzle, and "special" dispenser.... OUCH!!!
http://www.tamarrontechnology.biz/store/adhesives.html
/r
Brad
http://www.tamarrontechnology.biz/store/adhesives.html
/r
Brad
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: How to: Restore your carburetor insulators and rubber bi
So as another alternative, I looked on ebay for a used box. I wonder why everyone tears out the carb boots from the boxes for sale?
/r
B
/r
B
-
- ICOA Technical Director
- Posts: 4876
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: How to: Restore your carburetor insulators and rubber bi
Brad:
I just realized that the late model air chambers aren't meant to come apart. The early ones that I was referring to have screws all around the front so that you can take it apart. Yes, you'd have to find a decent adhesive to put back together. Try E6000. Available at about any craft store/hobby shop. I use it for lots of things like this and it works great. Cheap, Too.
Dave
I just realized that the late model air chambers aren't meant to come apart. The early ones that I was referring to have screws all around the front so that you can take it apart. Yes, you'd have to find a decent adhesive to put back together. Try E6000. Available at about any craft store/hobby shop. I use it for lots of things like this and it works great. Cheap, Too.
Dave
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: How to: Restore your carburetor insulators and rubber bi
Thank you for the info Dave.
-
- ICOA Web Post/Pix/Video Archive Mgt
- Posts: 2295
- Joined: Mon Dec 15, 2003 2:32 pm
- Location: Brighton, MI
- Location: Brighton, Mich
- Contact:
Re: How to: Restore your carburetor insulators and rubber bi
Brad,
Yes, E6000 is good stuff. Another good one I've found is J-B Weld Plastic Bonder. Comes in a Hypodermic type thing that you just squirt equal amounts as needed and mix. A nice reseal cap that lets it be stored easily. Can be used for almost any material. As always, with any adhesive, be certain to rough the surfaces and clean them before gluing. (Home Depot)
Yes, E6000 is good stuff. Another good one I've found is J-B Weld Plastic Bonder. Comes in a Hypodermic type thing that you just squirt equal amounts as needed and mix. A nice reseal cap that lets it be stored easily. Can be used for almost any material. As always, with any adhesive, be certain to rough the surfaces and clean them before gluing. (Home Depot)
Larry Zimmer
cbxlarry@sbcglobal.net
cbxlarry@sbcglobal.net
-
- ICOA Member
- Posts: 214
- Joined: Mon Apr 18, 2011 6:16 pm
- Location: burnaby Burnaby, British Columbiabritish columbia
- Location: Burnaby, British Columbia
Re: How to: Restore your carburetor insulators and rubber bi
hey guys
so I did the wintergreen and xylene on my boots and it worked awesome. question now is, after I pull the boots from the solution do I need to stop the process somehow or neutralize the solution somehow? I am ready to take them out of the xylene/wintergreen bath but what now????
thx
kent
so I did the wintergreen and xylene on my boots and it worked awesome. question now is, after I pull the boots from the solution do I need to stop the process somehow or neutralize the solution somehow? I am ready to take them out of the xylene/wintergreen bath but what now????
thx
kent
- NobleHops
- ICOA Member
- Posts: 3915
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Re: How to: Restore your carburetor insulators and rubber bi
Nope, just rinse them off and enjoy the minty-fresh smell of your shop for a while .
I bought a nice clean paint can at Home Depot and saved the brew.
Glad it worked well for you Kent!
I bought a nice clean paint can at Home Depot and saved the brew.
Glad it worked well for you Kent!
Nils Menten
Tucson, Arizona, USA
'82 CBX, among others.
Tucson, Arizona, USA
'82 CBX, among others.
-
- ICOA Member
- Posts: 214
- Joined: Mon Apr 18, 2011 6:16 pm
- Location: burnaby Burnaby, British Columbiabritish columbia
- Location: Burnaby, British Columbia
Re: How to: Restore your carburetor insulators and rubber bi
thanks nils
how's the weather down there right now? heard your getting some of that Cabo storm? heading to phoenix on Tuesday for a few days, hope it dries up....... boots came out great, always amazed at all the little tricks we can learn from you guys here.
thx
kent
how's the weather down there right now? heard your getting some of that Cabo storm? heading to phoenix on Tuesday for a few days, hope it dries up....... boots came out great, always amazed at all the little tricks we can learn from you guys here.
thx
kent
- NobleHops
- ICOA Member
- Posts: 3915
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Re: How to: Restore your carburetor insulators and rubber bi
Thanks Kent,
The storm has been a dud here so far, we will see what tomorrow brings. I did read that Cabo got hammered, did you check in on where you're headed?
Dying to go to Baja, will do that soon.
N.
The storm has been a dud here so far, we will see what tomorrow brings. I did read that Cabo got hammered, did you check in on where you're headed?
Dying to go to Baja, will do that soon.
N.
Nils Menten
Tucson, Arizona, USA
'82 CBX, among others.
Tucson, Arizona, USA
'82 CBX, among others.