Page 1 of 1
Three holes
Posted: Tue Dec 16, 2003 3:31 pm
by broook
On the left side front of the lower engine case there are two holes. On the right side front there is only one hole. My engine guard is bolted through two of these but what is the other one there for?
Three Holes
Posted: Thu Dec 18, 2003 9:55 pm
by Ron#5602
I think you have stumped the panel. Ron#5602
Posted: Fri Dec 19, 2003 8:28 am
by broook
Yes it appears that way. Pretty hard to do though. When the guys with the "Digest" modes get their mail I imagine somebody will come up with an answer.
three holes
Posted: Sat Dec 20, 2003 1:38 am
by skipscbx
If you look at the repair manual, you will see Honda uses an engine stand that use these holes you are talking about. Also, after market mfgs also use existing holes to make accessories for motorcycles. Hondaline made an engine guard years ago that used the holes in the engine hangers to mount the guard. I suspect this is the situation with the holes or tabs cast into the cases. Why there is two on one side and only one on the other is a mystery to me.
Posted: Sat Sep 10, 2005 10:20 am
by cbxtacy
Mower deck attachment? Honda does make mowers.
Posted: Sat Sep 10, 2005 12:54 pm
by broook
cbxtacy wrote:Mower deck attachment? Honda does make mowers.
Dam....... I never thought of that. I have my snowthrower hooked up to mine now.
