I've just bought a 79 and have begun to work through the various maintenance items. Upon removing the valve cover I found everything covered in this black oil slime. I'm wondering if the entire inside of the engine is coated this way and whether I need to worry about cleaning it out or just keep to regular oil changes?
Ross
Oil slime
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Oil slime
Are you going to take the head off?
If not, I would take the cams out and clean them including the oil orifices in the caps and take the oil pan off to clean the sump and the oil pump. Replace the screen. You should be fine. I would change the oil after running the bike for 500 miles.
If not, I would take the cams out and clean them including the oil orifices in the caps and take the oil pan off to clean the sump and the oil pump. Replace the screen. You should be fine. I would change the oil after running the bike for 500 miles.
- ajs350
- ICOA Member
- Posts: 327
- Joined: Wed Nov 17, 2010 2:19 pm
- Location: Atlanta GA USA
- Location: Atlanta, GA USA
Re: Oil slime
The head looks fine so I was going to leave it on. I'll follow your advice on the cams and oil screen.
Thanks for the advice.
Ross
Thanks for the advice.
Ross