Page 1 of 1

throttle cables

Posted: Fri Jun 01, 2007 1:44 pm
by DevonCbx
If anyone is not familiar with the throotle cables, I'll give a word of advise. Fish the cables through to the linkage before mounting the carbs. I fished the cables through after the carbs were in the bike. Talk about a pain. I used a piece of wire to do this. Needless to say with the lack of working space it took about 3 hour.
Duane

Posted: Fri Jun 01, 2007 5:50 pm
by alimey4u2
Duane, You will find that after a while it will get easier.... :lol:

Posted: Sun Jun 03, 2007 3:32 pm
by dsz1
DevonCbx,

Larry is letting you in on other secrets for your CBX :oha: but as you say getting the throttle cables on with the carbs mounted is a real pain in the A$$ for sure, :face: and after acouple of tries I fall back for a couple of :beer: and my wife tells me she enjoys learning new words everytime I attempt the same task.... But as Larry is saying it will get easier for sure... :banana:

Posted: Sun Jun 03, 2007 4:18 pm
by alimey4u2
Easier but never simple..... :lol: