I have the standard pipes off my 80 and find that I can move center pipe from side to side. There is a clamp that holds it to the collector and it is fully tight. Is this normal for there to be movement or should the center pipes be clamped tight? TIA.
Ross
Standard Exhaust - center pipe loose
-
ajs350
- ICOA Member
- Posts: 327
- Joined: Wed Nov 17, 2010 2:19 pm
- Location: Atlanta GA USA
- Location: Atlanta, GA USA
-
daves79x
- ICOA Technical Director
- Posts: 4921
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Standard Exhaust - center pipe loose
Ross:
Most move a bit, but there is a collar gasket in there that may need replaced. They are still available from Honda. You'll see what I mean if you take one off.
Dave
Most move a bit, but there is a collar gasket in there that may need replaced. They are still available from Honda. You'll see what I mean if you take one off.
Dave
-
ajs350
- ICOA Member
- Posts: 327
- Joined: Wed Nov 17, 2010 2:19 pm
- Location: Atlanta GA USA
- Location: Atlanta, GA USA
Re: Standard Exhaust - center pipe loose
Dave
I did not know those inserts were gaskets. Will get 2 new ones and re-install.
Thanks
Ross
I did not know those inserts were gaskets. Will get 2 new ones and re-install.
Thanks
Ross