Stock pipes question

Terry · Post by **Terry** » Tue Mar 04, 2003 2:26 am

After removing them from my 79 I saw that the (shields) weren't there and right below the collector pipe at the muffler, there is a stainless steel "patch?" in a 2" diamond shape welded in place. I assume running w/o the shields is ok but what about this patch? It (is) in a place that's likely to accumulate moisture. Suppose it was just a rust spot? The pipes are in great shape and the patch is on the underside and actually looks like a professional job. Better than original?

SS · Post by SS » Wed Mar 12, 2003 7:24 pm

Terry:
i'm curious did you/anyone ever find the answer to your question, regarding the stock exhaust pipes?

Terry · Post by **Terry** » Wed Mar 12, 2003 7:46 pm

No, I'm sorry to say, no one even responded after about 170+ (looks).

Except you. I'm not worried about it, just curious. The (patches) look great and seem to work fine and as for the shields not being there

Now if I can get up the gumption to put them back on and stop riding with the 6 into 1 set up (love that sound).

sr71cbx · Post by **sr71cbx** » Wed Mar 12, 2003 10:00 pm

Hey Terry,
Save the stockers for that totally cherry resto job,I agree with you on the 6:1 header sound,sure sounds sweet!!
SS,you got some wild equipment in that garage of yours!!
Take care & ride safe,
Mark Miller#0938

ken79 · Post by **ken79** » Sat Mar 15, 2003 8:02 pm

I'm sorry I can't shed any light on Terry's question regarding the patch
welding on his stock pipes

But I had a question regarding the availability
of stock pipes. I have the chance to purchase a very nice to excellent set
of stock pipes for what I think is a good price($ 400). As this is less than
I could buy the Kerker or DG set-up, and I wanted to get the bike closer
to stock, I'd appreciate any opinions. Is this a good deal or not? Right now
the bike has a Winning 6 into 1, which while funtional, is louder than I care
for. Thanks for any input. And while I haven't posted anything beyond
this one question, I been following everything on the website and think it
is great. Later on this summer, when I get my 79 going again, I hope to
be in the thick of things.

Ken79

SS · Post by SS » Sat Mar 15, 2003 8:51 pm

I believe that if you just look at what pipes are bringing on ebay, you'll be shocked.

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 99997&rd=1

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 08294&rd=1

http://cgi.ebay.com/ebaymotors/ws/eBayI ... 53097&rd=1

these ebay listings should help you decide that $400 is an outstanding price for even below average condition pipes

and if you don't like them sell them on ebay.

good luck

EMS · Post by **EMS** » Sat Mar 15, 2003 10:16 pm

If you don't want to buy them, tell me where they are.

You can't get ONE SIDE in really good condition for $400.00.

I suggest, you skip church tomorrow, and go and get them

ken79 · Post by **ken79** » Sat Mar 15, 2003 10:26 pm

SS,

Thanks for the links. As I suspected, $400 is quite a deal

. I already told
the guy I wanted the pipes. Even if I don't put them on the bike right
away, I'll hold onto them. As far as the shock of the ebay prices,
I had no idea that they'd gotten that high

. My bike has been stuck
in limbo for so long(1996), I got away from the cost of some parts. I had just
resolved to go aftermarket, until these gems appeared. This guy also
has an original seat, still in the box and wrapped in plastic. Any ideas
on the value of that?

Ken79

EMS · Post by **EMS** » Sun Mar 16, 2003 8:35 am

Seat is still available from Honda for approx $350 list price.

Some say it isn't and want to sell theirs for exorbitant amounts while trying to tell you that the last list from Honda was $500.-

Watch out. Considering that you may have or be able to negotiate a discount from your Honda dealer, Anything below $280.00 is a good price

The International CBX Owners Association

Stock pipes question

Stock pipes question

Stock pipes.......

Stock Pipes

$400 for stock pipes

Stock Pipes

stock pipes

Seat