Help with a ”hotrod” mod on a silencer.

[Marten]

Hello from Sweden.

Anyone who got a tip or idea on how to fix this exhaust rear ”baffle”? Maybe someone has a old silencer with a clean ”baffle” that i could weld in place.

IMG_0679.jpeg

I think previous owner wanted a better sound on his cbx and cut out the rear baffle on the silencer. Real shame for the pipes is in good shape and will look great after a Nils special phosporic acid treatment.

IMG_0677.jpeg

Its a HM422 system that also got a Sankei 2040 stamped.

Thanks Marten

[Jeff Bennetts]

Here are some pictures for a reference of what the baffle looks like, the front is just a friction fit into the mid pipe, the rear has a spot weld or two fitting it to the megaphone. So you’ll need a replacement baffle from an other wrecked or rotted system, preferably a 422.

I’m not sure why my pictures are posting upside down, not much I can do about it.

IMG_0219.jpeg

IMG_0217.jpeg

IMG_0209.jpeg

[Everpix]

I turned the pictures 180 degrees for you.

Pic 1.jpg

Pic 2.jpg

Pic 3.jpg

[Jeff Bennetts]

Thanks!

[Marten]

Thanks! I Will do a search around.