Spencer's awesome LED turnsignal kits - pictorial
- spencer
- ICOA Member
- Posts: 390
- Joined: Mon May 08, 2006 7:23 pm
- Location: Rochester, MN
- Location: Rochester, MN
Re: Spencer's awesome LED turnsignal kits - pictorial
Thanks for the report. I am glad you are happy with them!
SCH Rochester, MN
- wyly
- ICOA Member
- Posts: 1733
- Joined: Tue Oct 30, 2007 4:20 pm
- Location: calgary alberta canada
- Location: Calgary Canada
Re: Spencer's awesome LED turnsignal kits - pictorial
still loving my new indicators Spencer. Anything that improves my chances of being seen and not becoming a part of an SUV's grille has got to be awesome.spencer wrote:Thanks for the report. I am glad you are happy with them!
CBX a work in progress, still improving...GS1150EFE completed and awaiting modifications.....RD350, remnants in boxes scattered throughout the garage
- wyly
- ICOA Member
- Posts: 1733
- Joined: Tue Oct 30, 2007 4:20 pm
- Location: calgary alberta canada
- Location: Calgary Canada
Re: Spencer's awesome LED turnsignal kits - pictorial
so a day ago the right front was out, today went to have look and I noticed the right front indicator was down to only 3 three LEDs. I opened the headlight to check the connectors tried the indicators again now there is nothing. Plugged in the oems for left and right and they work perfectly. What's up, is there someway to test other than plugging them back in?spencer wrote:Thanks for the report. I am glad you are happy with them!
The rear indicators are okay.
CBX a work in progress, still improving...GS1150EFE completed and awaiting modifications.....RD350, remnants in boxes scattered throughout the garage
- spencer
- ICOA Member
- Posts: 390
- Joined: Mon May 08, 2006 7:23 pm
- Location: Rochester, MN
- Location: Rochester, MN
Re: Spencer's awesome LED turnsignal kits - pictorial
Well, you could have just emailed me, but as long as you have come here, I can't diagnose your problem from here. As I have always said, if they fail, return them to me and I will refund your money. I'll even repay your cost to return them to me. Or, return them to me and I will repair them and return them to you. Whatever you want. By the way, this is the first time I have heard of anyone having a problem with any of my turn signals.
If you want to test the turn signal, while not installed, just connect the green lead to ground, and either of the other two leads to 12 volts. All 12 LEDs should light. That will tell you if there is something wrong with the turn signal circuit.
If you want to test the turn signal, while not installed, just connect the green lead to ground, and either of the other two leads to 12 volts. All 12 LEDs should light. That will tell you if there is something wrong with the turn signal circuit.
SCH Rochester, MN