Page 1 of 1
Carb Blanking Plug Rubbers
Posted: Thu Sep 17, 2015 1:39 am
by Bird_Of_Prey
Hi Anybody Help with the blanking Plugs for 79 carbs - I recently overhauled my carbs with all viton o-rings - but the blanking plugs turned to mush after a few weeks - where i live we have E20 gasoline, but even the 95 octane must have ethanol in it. I would think the blanking plugs are HNBR or something similar - so I would need Viton blanking plugs - or perhaps teflon, or even brass plugs, the way am thinking now - a bit of wood would have to do
Re: Carb Blanking Plug Rubbers
Posted: Thu Sep 17, 2015 7:44 am
by steve murdoch icoa #5322
The plugs from Randakk are Viton.
I do not know if you can buy them separately from the kits.
http://randakks.com/products/randakks-o ... erhaul-kit
Re: Carb Blanking Plug Rubbers
Posted: Fri Sep 18, 2015 1:58 am
by Bird_Of_Prey
Thanks Steve good info.
Re: Carb Blanking Plug Rubbers
Posted: Sat Sep 19, 2015 8:51 am
by Randakk
The idle passage plugs shown above were not sourced from me ...wrong color. Ours are indeed made of genuine Viton.