I have just about got all the float levels correct just some minor adjustment to do now,(see other thread viewtopic.php?f=20&t=7531)
But having had my carbs in bits I have found this on the bench but unsure if its off the carbs or not,the inside diameter of the small bush is the same as the connecting rod in the middle of the carbs 3 and 4 its roughly about 5mm or 1/4 inch in diameter (see pics).
I have looked at several parts diagrams but cannot see this part, does anyone recognise it ?
Thanks Sneck
Is this off the carbs
- sneck
- Forum Regular
- Posts: 37
- Joined: Fri Oct 14, 2011 6:15 pm
- Location: United Kingdom
- Location: United Kingdom
-
- ICOA Member
- Posts: 4103
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Is this off the carbs
Sneck it looks to me like part# 11346-371-300
A spacer on a bolt near the cover where you check the oil level.
Part #2?
http://www.bikebandit.com/houseofmotorc ... #sch404550
A spacer on a bolt near the cover where you check the oil level.
Part #2?
http://www.bikebandit.com/houseofmotorc ... #sch404550
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia
Re: Is this off the carbs
Are your air Tees in place?
- cbx6ss
- ICOA Member
- Posts: 350
- Joined: Tue Apr 26, 2005 9:17 pm
- Location: Virginia Beach, Virginia
- Location: Virginia Beach, Virginia