carb bench stand

barryadam · Post by **barryadam** » Tue Jan 19, 2010 2:55 pm

Does anyone still make that CBX carb bench stand / holder?
Anyone have an old one they want to part with?
If not, does anyone have any pics of the details of how they were made?

TIA,

Barry

EMS · Post by **EMS** » Tue Jan 19, 2010 2:57 pm

Excellent question! Never seen one myself. If I think about it...all these years of rolling the bank of carbs around on the flat top of a workbench....

Jeff Bennetts · Post by **Jeff Bennetts** » Tue Jan 19, 2010 8:22 pm

I made one up on the cheap but like Mike said I just end up flipping the carbs around on the bench.

I can post a pick of the one I cobbled together tomorrow.

Randakk · Post by **Randakk** » Fri Jan 22, 2010 2:04 pm

Like mine?

If so, it's a common K&L item. Any dealer with a K&L Supply catalog (about 99% of all dealers) could order one for you.

Here's the part number: #29-2282

I like it, but I made some minor mods to help it accept the unique "V" shape of CBX carbs.

barryadam · Post by **barryadam** » Fri Jan 22, 2010 8:56 pm

Great. Thanks Randall.
That's the one I had in mind. I do not see it in their 2009 catalog.

However, they do have a stand 35-7679 with a plate base and expansion plugs. Will have to find out if it is wide enough for the six CBX carb bank.

Their website and catalog have a CBX motor shown in their motor stand though.

p.s. I'm saving up for your carb kits.

Barry

alimey4u2 · Post by **alimey4u2** » Sun Jan 24, 2010 6:47 pm

Thinking out the box, if someone had a shot cylinder head, that may make a good rack too... Depends what you would want to do I spose....

Randakk · Post by **Randakk** » Tue Jan 26, 2010 9:12 am

I got home from my trip and looked in my K&L catalog.

35-7679 is indeed the correct part number for my K&L stand.

The number I mentioned above was the product of a flawed internet search.