The International CBX Owners Association

I have a stage 3 kit on my cbx1000 z and I am cleaning the carbs,the stage 3 was fitted before I got the bike it has a gas flowed head with 3 K&N filters
and Pipemaster 6into6 exhaust I have no instructions to look at for tuning,I found instructions for a stage 1 kit on the net and it says put the e clip on the 4th groove from the top,my clips are on the top groove with 98 main jets and fuel mixture screws out 2 1/2 turns out,has anybody any idea what the correct setting should be.

Lots of guys here have the experience Des...Alas I don't but someone will come aolng soon...

I'd say whichever combination works is the correct setting. Was it running to your satisfaction already? It's probably right. Elevation has a lot to do with it too, but if it wasn't exhibiting lean or rich conditions anywhere, you're probably fine.