Ball spring and brass plug

Post Reply
tridentracing
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 2
Joined: Wed Jul 04, 2018 9:39 am
Location: Silverstone
Location: Silverstone

Ball spring and brass plug

Post by tridentracing »

Hope someone can help me. I have a CBX1000Z that came partially dismantled/assembled.The carbs have been cleaned and all jets removed. I am putting them back together bur have a small spring, ball and brass plug left over. There appears to be a similar set in the accelerator pump housing/ float chamber where the fuel is sent to the pump jet passageway. I,ve looked everywhere but can,t see where it came from.
Any ideas????]

tridentracing
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 2
Joined: Wed Jul 04, 2018 9:39 am
Location: Silverstone
Location: Silverstone

Re: Ball spring and brass plug

Post by tridentracing »

Found it!!! Goes in the pump cover. Thanks to Mike Nixon and Steve Gosine. Top people and very helpful.

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”