Page 1 of 1
Carb intake boot clips.
Posted: Sat Apr 14, 2018 8:37 pm
by sixinoz
What was the factory setup for the carb intake boot clips? Mine has 1 and 6 both screws on the bottom and others one screw top and one bottom.
Would assume that clip screws should be together all same way???
Re: Carb intake boot clips.
Posted: Sat Apr 14, 2018 8:59 pm
by Larry Zimmer
While I don't know if there is a 'factory' orientation, I would suggest you just orient them to give you best access after everything is buttoned up. That way, you can check for tightness some time later.
Re: Carb intake boot clips.
Posted: Sat Apr 14, 2018 9:13 pm
by steve murdoch icoa #5322
Have a read through this thread about the clamps and after your head stops spinning the "orientation" should become clear.
viewtopic.php?f=20&t=6957
Re: Carb intake boot clips.
Posted: Sun Apr 15, 2018 11:54 am
by Larry Zimmer
Read through that thread/post, Steve. Made my day. I realize it was all very sincere. However, all I could think was ----
Who's on First??! 
Re: Carb intake boot clips.
Posted: Sun Apr 15, 2018 12:01 pm
by steve murdoch icoa #5322
Great minds, Larry.
I was thinking the exact same thing.