Generator thrust washer
Posted: Wed Feb 18, 2004 9:54 pm
Can anyone tell me the suggested thickness of the thrust washer behind the generator clutch?
The International CBX Owners Association
Dedicated to the enjoyment and preservation of the 6-Cylinder Honda CBX-1000 Motorcycle. Huge technical library!
https://cbxpress.com/forum/
Generator thrust washer
Page 1 of 1
Alternator washer thickness
Posted: Sat Feb 28, 2004 9:39 pm
You're in the wrong area. Answers to your question is in the electrical section under alternator., but here are the numbers anyway. The plastic washer is 2 mm thick, the metal washer is 1/5 mm thinck and the spring free length is about 29.5mm