#1 running rich: checklist please?

[bdento59]

...when calculating for
orifice diameter, that means that the #1 pilot jet is ~124% larger than it
should be.

Rechecking myself, I should have used 0.0138" (0.35mm) for the dia of the #35 jet, not the 0.012" which was the size of the wire that passed through it. So, in fact the oversize hole in the pilot jet is only ~69% too large, not 124% too large like I had originally calculated. Still, it's like running a #45 idle jet, which explains a lot.

[alimey4u2]

Looks like your on the way Bill, thanks for the valuable feedback..

[piit]

Hi, these are interesting discussion topics thus would be nice to read how the story ended!
-piit-