Choke Lever perch Question

Post Reply
Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Choke Lever perch Question

Post by Artie »

On the choke lever shaft which slides into handlebar perch there is a small spring in a hole with a set screw within the perch I have the spring and set screw but it appears to have a corresponding ball …..maybe? that indexes within the groove on the choke lever shaft
I do not have that ball? If that’s what it is ?
It does not show as a part on the microfiche
I got this bike in pieces in boxes so it’s an interesting puzzle but I’m making great progress on full restoration
I could disassemble my present CBX and it’s choke lever but I’m sure my fellow members would enlighten me
If it is a ball where could I get one any ideas TIA

JoeInTUS
Forum Regular
Forum Regular
Posts: 139
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Choke Lever perch Question

Post by JoeInTUS »

It is not a ball, it is a small cylinder with a conical end. The pointy end of the cone goes into the groove. Sorry don’t have a picture handy.
Joe S
Tucson, AZ

User avatar
bobcat
Power Poster
Power Poster
Posts: 432
Joined: Mon Aug 22, 2011 6:35 pm
Location: Dallas Texas
Location: Dallas Texas

Re: Choke Lever perch Question

Post by bobcat »

You got the bike "in pieces in boxes" ? :shock: Man I hope the rest of it wasn't disassembled
to that extent or you REALLY do have a puzzle on your hands ! :lol:
Bob
82 CBX, 81 CBX, CB1100F, 79/82 CB900F (avatar)

Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Re: Choke Lever perch Question

Post by Artie »

Bought 2 1979 Z models that have been sitting for 10 + years mostly all there both rollers with engines in chassis but one has been stripped down to basic roller shape both provided plenty of room for few generations of rodents to call home
Doing best one first and making great progress will be running soon hopefully PO says both ran when parked
Few pics attached now I own 3 of these marvelous machines
1D83D42E-8940-417B-B4D6-267C00955204.jpeg
You do not have the required permissions to view the files attached to this post.

User avatar
bobcat
Power Poster
Power Poster
Posts: 432
Joined: Mon Aug 22, 2011 6:35 pm
Location: Dallas Texas
Location: Dallas Texas

Re: Choke Lever perch Question

Post by bobcat »

Lovely nests but it appears the rollers are in good hands !
Bob
82 CBX, 81 CBX, CB1100F, 79/82 CB900F (avatar)

Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Re: Choke Lever perch Question

Post by Artie »

JoeInTUS wrote:
Wed Sep 28, 2022 9:05 pm
It is not a ball, it is a small cylinder with a conical end. The pointy end of the cone goes into the groove. Sorry don’t have a picture handy.
Could you take a pic and maybe I could make one if it’s as you say using a machine screw of that diameter or a drill bit ground to conical end
Sounds doable with a photo as a guide……anyone please

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 4876
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: Choke Lever perch Question

Post by daves79x »

Someone (me, I guess) will have one of those. I'd just sell you a whole used perch and you could scavenge parts.

Dave

JoeInTUS
Forum Regular
Forum Regular
Posts: 139
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Choke Lever perch Question

Post by JoeInTUS »

We might have a loose one from a damaged perch at the shop, but Nils and I are both out of town for another week or so
Joe S
Tucson, AZ

JoeInTUS
Forum Regular
Forum Regular
Posts: 139
Joined: Sun Jul 12, 2020 4:01 pm
Location: Tucson, AZ
Location: Tucson, AZ

Re: Choke Lever perch Question

Post by JoeInTUS »

Checked our stash, we do not have a loose one.
Joe S
Tucson, AZ

Artie
ICOA Member
ICOA Member
Posts: 170
Joined: Tue Oct 15, 2013 4:35 pm
Location: Medford Ma
Location: Medford Ma

Re: Choke Lever perch Question

Post by Artie »

Thanx fellow member provided one appreciate you looking tho👌😀

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”