Can't get slow speed jet out

Post Reply
Dmerc
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 24
Joined: Mon Dec 18, 2017 7:12 pm
Location: United States
Location: United States

Can't get slow speed jet out

Post by Dmerc »

Tried penetrating oil and the sheet metal screw trick and it won't come out. Does this jet have an o ring on it? Will some heat help? Carbs are nice and clean for the most part but this jet is plugged. Thanks for any tips.

Larry Zimmer
ICOA Web Post/Pix/Video Archive Mgt
ICOA Web Post/Pix/Video Archive Mgt
Posts: 2196
Joined: Mon Dec 15, 2003 2:32 pm
Location: Brighton, MI
Location: Brighton, Mich
Contact:

Re: Can't get slow speed jet out

Post by Larry Zimmer »

Here's one good means: viewtopic.php?f=20&t=6817 Good luck.
Larry Zimmer
cbxlarry@sbcglobal.net

Dmerc
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 24
Joined: Mon Dec 18, 2017 7:12 pm
Location: United States
Location: United States

Re: Can't get slow speed jet out

Post by Dmerc »

Larry Zimmer wrote:Here's one good means: viewtopic.php?f=20&t=6817 Good luck.
thanks allot Larry, the pics on that other thread are awesome. I was finally able to clear the jet but since you can't see the air bleeds it's anyone's guess as to whether they are clear or not. Guess I'll make the tap bushing and pull them all out. Thanks again,dave

Post Reply

Return to “CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More”