You make a good point, and that's something I hadn't given careful consideration to. I'm pretty sure that I've seen bigger rotors on similar wheels, but we'll need more than that to make sure it's doable. Lots of measurements to be done before this setup is finalized.EMS wrote:Looking great Phil!
But it also looks rather tight One of the most annoying problems I have on some bikes is the difficulty of removing the front wheel, becasue it is very hard to pull the calipers off through the tight space between the rotor and the rim.
With the large ID of these rotors, maybe they can be unbolted from the adapters and dropped enough to give clearance to pull the calipers before the wheel is removed. We'll see.