Hey-o, this is just a straw poll, no immediate plans to act, but:
Yes or no, would you be interested in high quality REAR footpeg rubbers if a person was to mold them, and if so, how many sets would you take?
N.
Call for interest - REAR footpeg rubbers
- NobleHops
- ICOA Member
- Posts: 3881
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Call for interest - REAR footpeg rubbers
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)
Tucson, Arizona, USA '80 CBX, sort-of restored :-)
-
- ICOA Member
- Posts: 4080
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Call for interest - REAR footpeg rubbers
Nils, thanks for looking into this but no for me.
They never get used.
They never get used.
-
- ICOA Member
- Posts: 404
- Joined: Tue Feb 16, 2010 1:29 pm
- Location: Clinton Twp, Michigan
- Location: Clinton Twp., Michigan, USA
Re: Call for interest - REAR footpeg rubbers
As I mentioned on the other site:
I have a box, full of good rear pegs since the majority of these bikes are near-never ridden 2 up. I have so many, that I modify the mount and use them for the fronts.
The fronts are always worn, especially the left. When most guys will step up on that peg, twist while throwing the right leg over and rip off the chicklets with the bottom of their boot/shoe.
So, that wouldn't be me.
I have a box, full of good rear pegs since the majority of these bikes are near-never ridden 2 up. I have so many, that I modify the mount and use them for the fronts.
The fronts are always worn, especially the left. When most guys will step up on that peg, twist while throwing the right leg over and rip off the chicklets with the bottom of their boot/shoe.
So, that wouldn't be me.
You do not have the required permissions to view the files attached to this post.
- NobleHops
- ICOA Member
- Posts: 3881
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Re: Call for interest - REAR footpeg rubbers
These came out great, and my first batch is spoken for with prior orders. If there is interest I may commission a second run, just post up any interest about that here. Selling price is $45 US per pair, PLUS shipping.
You do not have the required permissions to view the files attached to this post.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)
Tucson, Arizona, USA '80 CBX, sort-of restored :-)
- NobleHops
- ICOA Member
- Posts: 3881
- Joined: Mon Jan 25, 2010 7:17 am
- Location: Tucson, Arizona, USA
- Location: Tucson, Arizona, USA
Re: Call for interest - REAR footpeg rubbers
Guys, our friend Terry Schmitt aka "Tevan" or "Texan" is going to take this over moving forward, and that news is hot off the press. Terry also sells the front rubbers. If you want these, Terry is the guy with whom you should register your interest.
Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)
Tucson, Arizona, USA '80 CBX, sort-of restored :-)