Page 1 of 1
Identifying a rotor
Posted: Sat Nov 15, 2014 12:56 pm
by nsrrider
Does anyone recognize these vintage Honda rotors and what bike they came from? Thanks!
disc.JPG
Re: Identifying a rotor
Posted: Sat Nov 15, 2014 3:20 pm
by EMS
I first though they were early Goldwing rotors, but they are not.
Are you sure they are Honda rotors? Most Honda rotors have a "rivet" between the outer and the inner section of the rotor. The only pre-1979 Hondas with dual rotors were the GL and the CB750. Their rotors had an additional rib on the "spoke" between the holes.
I will put some money on a Yamaha Virago XV920 rotor
Re: Identifying a rotor
Posted: Sat Nov 15, 2014 5:28 pm
by daves79x
I don't the six-bolt pattern is Honda either.
Dave
Re: Identifying a rotor
Posted: Sat Nov 15, 2014 7:28 pm
by steve murdoch icoa #5322
Yammie XS650?
Re: Identifying a rotor
Posted: Sat Nov 15, 2014 11:35 pm
by nsrrider
steve murdoch icoa #5322 wrote:Yammie XS650?
very similar but no, thx!
Re: Identifying a rotor
Posted: Sat Nov 15, 2014 11:46 pm
by nsrrider
rotor1.png
well, they may be from a Yamaha xs750.....this is an image from google.....the trouble is......I have NO idea why I would have them in my garage.....I've never had an XS750.....
Re: Identifying a rotor
Posted: Sun Nov 16, 2014 6:30 am
by EMS
1980/81 Yamaha XV920
- which could have been the same as for the XS750...
Re: Identifying a rotor
Posted: Sun Nov 16, 2014 7:45 am
by nsrrider
I've had them laying around in the shop for years and the curiosity finally got the best of me. It looks like the rotor fairy's left them for me! The Yamaha rotors certainly appear to be a match, Thanks guys!