Identifying a rotor
-
- New Member & Happy To Be Here
- Posts: 11
- Joined: Sat Jan 15, 2005 10:04 am
Identifying a rotor
Does anyone recognize these vintage Honda rotors and what bike they came from? Thanks!
You do not have the required permissions to view the files attached to this post.
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
Re: Identifying a rotor
I first though they were early Goldwing rotors, but they are not.
Are you sure they are Honda rotors? Most Honda rotors have a "rivet" between the outer and the inner section of the rotor. The only pre-1979 Hondas with dual rotors were the GL and the CB750. Their rotors had an additional rib on the "spoke" between the holes.
I will put some money on a Yamaha Virago XV920 rotor
Are you sure they are Honda rotors? Most Honda rotors have a "rivet" between the outer and the inner section of the rotor. The only pre-1979 Hondas with dual rotors were the GL and the CB750. Their rotors had an additional rib on the "spoke" between the holes.
I will put some money on a Yamaha Virago XV920 rotor
-
- ICOA Technical Director
- Posts: 4761
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Identifying a rotor
I don't the six-bolt pattern is Honda either.
Dave
Dave
-
- ICOA Member
- Posts: 4075
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Identifying a rotor
Yammie XS650?
-
- New Member & Happy To Be Here
- Posts: 11
- Joined: Sat Jan 15, 2005 10:04 am
Re: Identifying a rotor
very similar but no, thx!steve murdoch icoa #5322 wrote:Yammie XS650?
-
- New Member & Happy To Be Here
- Posts: 11
- Joined: Sat Jan 15, 2005 10:04 am
Re: Identifying a rotor
well, they may be from a Yamaha xs750.....this is an image from google.....the trouble is......I have NO idea why I would have them in my garage.....I've never had an XS750.....
You do not have the required permissions to view the files attached to this post.
-
- ICOA Member
- Posts: 10151
- Joined: Wed Mar 05, 2003 7:55 am
- Location: North East OH, ICOA 3904
-
- New Member & Happy To Be Here
- Posts: 11
- Joined: Sat Jan 15, 2005 10:04 am
Re: Identifying a rotor
I've had them laying around in the shop for years and the curiosity finally got the best of me. It looks like the rotor fairy's left them for me! The Yamaha rotors certainly appear to be a match, Thanks guys!