81 rear brake master cylinder pushrod

Post Reply
Teds
ICOA Member
ICOA Member
Posts: 3
Joined: Fri Oct 21, 2016 12:23 am
Location: Breaux Bridge
Location: Breaux Bridge

81 rear brake master cylinder pushrod

Post by Teds »

Any know where I might find an 81 rear master cylinder pushrod (pn 43530-461-771)? My pushrod is beyond salvage. Appears they are I longer avialible from Honda. Any help would be appreicated
Ted

tevan
ICOA Member
ICOA Member
Posts: 699
Joined: Sun Apr 25, 2010 8:47 am
Location: Charleston, Illinois, USA
Location: Charleston, Illinois, USA

Re: 81 rear brake master cylinder pushrod

Post by tevan »

They come the rebuild kits. I use k&l aftermarket kit.

Teds
ICOA Member
ICOA Member
Posts: 3
Joined: Fri Oct 21, 2016 12:23 am
Location: Breaux Bridge
Location: Breaux Bridge

Re: 81 rear brake master cylinder pushrod

Post by Teds »

Thanks I will check them out!

Teds
ICOA Member
ICOA Member
Posts: 3
Joined: Fri Oct 21, 2016 12:23 am
Location: Breaux Bridge
Location: Breaux Bridge

Re: 81 rear brake master cylinder pushrod

Post by Teds »

Hey Taven, I was looking at your bike,what kind of exhaust system do you have? Have not got that far on my project yet. But I am gathering opinions.
Thanks Ted

tevan
ICOA Member
ICOA Member
Posts: 699
Joined: Sun Apr 25, 2010 8:47 am
Location: Charleston, Illinois, USA
Location: Charleston, Illinois, USA

Re: 81 rear brake master cylinder pushrod

Post by tevan »

That is actually a stock exhaust that was cut off at the weld seam10 or so inches from the end. Previous owner did it.

Post Reply

Return to “BRAKES: Calipers, Pads, Lines, Rotors, Upgrades & Fixes”