Hi all.
I want to do silver braided stainless lines with black banjos & bolts, and I want a DIY kit to cut & fit the lines on the bike rather than taking measurements & ordering them (I have non-stock triple clamps, handlebars, and calipers).
What I'm having trouble with is finding a source for this stuff in all black. I will be running 2 lines from the M/C, one to each caliper, with no splitter. I'll definitely have banjos at the M/C, but might do straight connectors like this at the calipers:
It depends on how everything lines up once the calipers are mounted on the bike.
If anyone has a source for this kind of stuff in black, I would really appreciate it.
Source for DIY lines with black fittings?
- Syscrush
- ICOA Member
- Posts: 1723
- Joined: Fri Sep 14, 2012 2:29 pm
- Location: Toronto, ON
- Location: Toronto, ON
-
- ICOA Member
- Posts: 4079
- Joined: Tue Mar 04, 2003 9:12 am
- Location: St. Catharines, On. Canada
- Location: St. Catharines, On. Canada
Re: Source for DIY lines with black fittings?
I don't know if Apex sells raw parts or if they only sell finished products but i would contact them and ask.
http://www.apexbrakes.com/
http://www.apexbrakes.com/
- Syscrush
- ICOA Member
- Posts: 1723
- Joined: Fri Sep 14, 2012 2:29 pm
- Location: Toronto, ON
- Location: Toronto, ON
Re: Source for DIY lines with black fittings?
Thanks Steve. I found them via one of your posts and did contact them. Waiting to hear back.steve murdoch icoa #5322 wrote:I don't know if Apex sells raw parts or if they only sell finished products but i would contact them and ask.
http://www.apexbrakes.com/
- Syscrush
- ICOA Member
- Posts: 1723
- Joined: Fri Sep 14, 2012 2:29 pm
- Location: Toronto, ON
- Location: Toronto, ON
Re: Source for DIY lines with black fittings?
Apex does assembled/crimped lines only.