Engine smoking after oil change

Post Reply
mbutchers
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 3
Joined: Fri May 25, 2012 2:04 pm
Location: California
Location: California

Engine smoking after oil change

Post by mbutchers »

Not sure what oil was in the bike when I got it, but the guy I got the bike from gave me an unopened 4l container of Millers semi synthetic 10 -40. The problem is, the bike has started smoking a little on start up. It had never done this prior to the oil change. The bike is still running great. I was wondering if this is usual to have a little smoke, or if it's something I need to worry about?
Last edited by mbutchers on Thu Feb 05, 2015 1:45 am, edited 2 times in total.

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 4069
Joined: Tue Mar 04, 2003 9:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: Engine smoking after oil change

Post by steve murdoch icoa #5322 »

Welcome to the site, mbutchers.
Never had that happen and i have switched between full synthetic, semi-sythetic and dino oil.
No way i am getting into a which oil to use debate but any chance it was not motorcycle dedicated Millers?

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: Engine smoking after oil change

Post by EMS »

I don't think the engine burning oil is the result of the type of oil. The symptoms point towards leaking valve guide seals. Oil smoke is typically heavier right after start up, when the oil had time to leak into the combustion chamber. Then it gets a little better. If the seals are really bad, it continues to smoke while engine is running.

mbutchers
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 3
Joined: Fri May 25, 2012 2:04 pm
Location: California
Location: California

Re: Engine smoking after oil change

Post by mbutchers »

Thanks for the replies chaps.
I too would be surprised if it was oil related, it's strange that I have never had the issue until immediately after the oil change. I was inclined to think either valve guides/seals, or potentially piston rings.
Any other thoughts/experiences?

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: Engine smoking after oil change

Post by EMS »

Did you overfill the motor? Pull the dipstick and see if the oil is foamy.

Rick Pope
ICOA Rally Director
ICOA Rally Director
Posts: 2270
Joined: Wed Sep 03, 2003 3:16 pm
Location: Lawrencburg, IN
Location: Lawrenceburg, Indiana

Re: Engine smoking after oil change

Post by Rick Pope »

Am I correct that there are two amounts of oil capacity listed, one is total volume, the other for a change? Or am I just imagining that I read that somewhere?
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.

EMS
ICOA Member
ICOA Member
Posts: 10151
Joined: Wed Mar 05, 2003 7:55 am
Location: North East OH, ICOA 3904

Re: Engine smoking after oil change

Post by EMS »

Rick Pope wrote:Am I correct that there are two amounts of oil capacity listed, one is total volume, the other for a change? Or am I just imagining that I read that somewhere?

Yes, you are correct, Rick. It is 5.5 liters after engine disassembly and 4.0 liters after just draining for an oil change. You probably read it in the Service Manual. 8) 8)

mbutchers
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 3
Joined: Fri May 25, 2012 2:04 pm
Location: California
Location: California

Re: Engine smoking after oil change

Post by mbutchers »

EMS wrote:Did you overfill the motor? Pull the dipstick and see if the oil is foamy.
No, 4 litres went back in, just under actually.
Running with oil half way up the dipstick.

Post Reply

Return to “OILS: Specs, Opinions, Preferences, and more”