I've lost the rear axle collar on the sprocket side on my 79z. It'll take too long to have one shipped to me as I need it asap so I'll go to a local machine shop and have one made.
I know the axle is 20mm so is the inside diameter also 20mm or is it 20.1mm or 20.01mm?
What is the outside diameter?
What is the length?
Is there any particular metal I should be using or not using?
rear axle collar dimensions please?
- wyly
- ICOA Member
- Posts: 1727
- Joined: Tue Oct 30, 2007 4:20 pm
- Location: calgary alberta canada
- Location: Calgary Canada
rear axle collar dimensions please?
CBX a work in progress, still improving...GS1150EFE completed and awaiting modifications.....RD350, remnants in boxes scattered throughout the garage
-
- ICOA Member
- Posts: 699
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: rear axle collar dimensions please?
I have 34 mm outside. 23.22 mm long... It is made of steel.. I have no idea the hardness but I do not think it is hard..
I hope this helps..
Terry
I hope this helps..
Terry
- wyly
- ICOA Member
- Posts: 1727
- Joined: Tue Oct 30, 2007 4:20 pm
- Location: calgary alberta canada
- Location: Calgary Canada
Re: rear axle collar dimensions please?
Yes that does help a lot, thanks Terrytevan wrote:I have 34 mm outside. 23.22 mm long... It is made of steel.. I have no idea the hardness but I do not think it is hard..
I hope this helps..
Terry
any idea of the inside diameter? Exactly 20mm or 20.01?
CBX a work in progress, still improving...GS1150EFE completed and awaiting modifications.....RD350, remnants in boxes scattered throughout the garage
-
- ICOA Rally Director
- Posts: 2270
- Joined: Wed Sep 03, 2003 3:16 pm
- Location: Lawrencburg, IN
- Location: Lawrenceburg, Indiana
Re: rear axle collar dimensions please?
Make it the same as the inside diameter of the bearing and you'll be safe.
Rick Pope
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
Either garage is too small or we have too many bikes. Or Momma's car needs to go outside.
-
- ICOA Member
- Posts: 699
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: rear axle collar dimensions please?
I was getting different readings on that. I would just take the bolt with you and have them make it so it just does go on with a little play.
- wyly
- ICOA Member
- Posts: 1727
- Joined: Tue Oct 30, 2007 4:20 pm
- Location: calgary alberta canada
- Location: Calgary Canada
Re: rear axle collar dimensions please?
Success, found something from another bike I have know idea what but it matches the measurements and it fits. I'll track down the real item later and switch it out this winter. Thanks for the assistance.
CBX a work in progress, still improving...GS1150EFE completed and awaiting modifications.....RD350, remnants in boxes scattered throughout the garage
-
- ICOA Member
- Posts: 699
- Joined: Sun Apr 25, 2010 8:47 am
- Location: Charleston, Illinois, USA
- Location: Charleston, Illinois, USA
Re: rear axle collar dimensions please?
Great! Now you can get it on the road!