CBX 1979 exhaust stamping


Post Reply
kwbikr
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 8
Joined: Sun May 24, 2020 5:35 pm
Location: Indiana
Location: Indiana

CBX 1979 exhaust stamping

Post by kwbikr »

I have a recently-acquired 1979 CBX "survivor"...two owner 7000 mile original, apparently unmolested as best I can determine...I have an '80 I bought in 1995 with 33 miles on it...Here's my question:

My '80 has the original pipes on it, they have no marking on the top of the mufflers at all...

The '79 I just got has what appear to be factory pipes on it, they show some honest wear and a very few flaws, but they have a "USA and Canada" text stamped into the tops of both mufflers...I have seen this before but assumed the "text" stamped versions were Honda replacement OEM pipes...I'm pretty certain this bike is all original and I recently saw another '79 "survivor" with the stamped mufflers on it...

What can the brain trust tell me about this seemingly odd difference in the mufflers?

Thanks in advance...

KW

jnnngs
ICOA Member
ICOA Member
Posts: 376
Joined: Tue Feb 10, 2015 3:05 pm
Location: Hants/UK
Location: Hants/UK

Re: CBX 1979 exhaust stamping

Post by jnnngs »

They are as you say - OEM / Honda replacements sold for the Canada / USA market. Would not have had these fitted at the factory, so have been replaced at some point in its life.

steve murdoch icoa #5322
ICOA Member
ICOA Member
Posts: 3524
Joined: Tue Mar 04, 2003 10:12 am
Location: St. Catharines, On. Canada
Location: St. Catharines, On. Canada

Re: CBX 1979 exhaust stamping

Post by steve murdoch icoa #5322 »

Welcome to the site, KW.
How about an introductory thread with some pics of your bikes. Maybe a thread about getting the '79 back on the road.

User avatar
EMS
ICOA Member
ICOA Member
Posts: 9705
Joined: Wed Mar 05, 2003 8:55 am
Location: North East OH, ICOA 3904

Re: CBX 1979 exhaust stamping

Post by EMS »

The original factory exhausts had a Sankei stamp and a Honda ID stamp. The Honda stamp for 1979 was HM422, for 1980 it was HM469. These stamps are close to the hanger brackets and can be seen when the exhaust is mounted.
Neither one of these exhaust had a "crossover" pipe, a connection of the two sides right behind the headers. If one of your exhausts has this, it is a "Prolink" (81/82) exhaust, which was stamped HMMA2. The larger "text stamp" was an EPA mandate for replacement exhausts. While I have seen these for 81/82, I have never seen a HM422 or HM469 with an EPA stamp. Then again, I have not seen everything...
To be understood is the exception
To be misunderstood is the rule.

kwbikr
New Member & Happy To Be Here
New Member & Happy To Be Here
Posts: 8
Joined: Sun May 24, 2020 5:35 pm
Location: Indiana
Location: Indiana

Re: CBX 1979 exhaust stamping

Post by kwbikr »

OK, these are HM422's and they have the EPA stamp on top...I'm working to figure out the image posting method...pics will follow
CBX 79a (20).JPG
CBX 79a (19).JPG
CBX 79a (17).JPG
CBX 79a (16).JPG
CBX 79a (15).JPG
CBX 79a (5).JPG
You do not have the required permissions to view the files attached to this post.

daves79x
ICOA Technical Director
ICOA Technical Director
Posts: 3921
Joined: Sun Oct 01, 2006 8:05 am
Location: Knox, PA
Location: Knox, PA

Re: CBX 1979 exhaust stamping

Post by daves79x »

Yes, all versions of replacement pipes from Honda had the 'paragraph' stamping, at least for the US and Canada markets. I have a replacement 469 pipe with it on.

Dave

User avatar
NobleHops
ICOA Member
ICOA Member
Posts: 3186
Joined: Mon Jan 25, 2010 8:17 am
Location: Tucson, Arizona, USA
Location: Tucson, Arizona, USA

Re: CBX 1979 exhaust stamping

Post by NobleHops »

What'd I tell ya :-)/ Welcome Kim!
I Do Vapor Blasting! viewtopic.php?f=5&t=9881

Nils Menten
Tucson, Arizona, USA '80 CBX, sort-of restored :-)

http://www.restocycle.com Ikon shocks for your CBX! https://www.ikonshocksusa.com/collectio ... 1000-79-80

Post Reply

Return to “EXHAUSTS: What works and fits...and what doesn't.”