Hi. I have a 1981 CBX1000 Prolink and am looking for a 2nd hand accelerator pump housing.
Cheers
Mark
I seem to have lost the inner 1-way valve in mine ?
Any help in sourcing a good 2nd hand one would be highly appreciated.Accelerator pump housing
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Sun Feb 24, 2019 11:52 pm
- Location: Wellington, New Zealand
- Location: Wellington, New Zealand
Accelerator pump housing
You do not have the required permissions to view the files attached to this post.
-
- ICOA Member
- Posts: 423
- Joined: Tue Feb 16, 2010 1:29 pm
- Location: Clinton Twp, Michigan
- Location: Clinton Twp., Michigan, USA
Re: Accelerator pump housing
The heat and vibration in an ultrasonic cleaner can shake these apart, removing the square brass piece, spring and ball bearing that acts as a check valve. I no longer clean them in the machine with the rest of the parts for that very reason.
Although not sold as a service part by itself, it's the exact same component as any Honda DOHC 4 of that era.
Those may be easier to find in your area.
Although not sold as a service part by itself, it's the exact same component as any Honda DOHC 4 of that era.
Those may be easier to find in your area.
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Sun Feb 24, 2019 11:52 pm
- Location: Wellington, New Zealand
- Location: Wellington, New Zealand
Re: Accelerator pump housing
Many thanks for the reply. I think I may have found one off a GL1500 ?
I'll be more wary of my ultrasonic cleaner in future :)
I'll be more wary of my ultrasonic cleaner in future :)
-
- ICOA Member
- Posts: 423
- Joined: Tue Feb 16, 2010 1:29 pm
- Location: Clinton Twp, Michigan
- Location: Clinton Twp., Michigan, USA
Re: Accelerator pump housing
The parts are probably still in the bottom of the tank.
That cover was never sold as the single part, so, I can't confirm that the GL part will fit/function properly.
That cover was never sold as the single part, so, I can't confirm that the GL part will fit/function properly.
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Sun Feb 24, 2019 11:52 pm
- Location: Wellington, New Zealand
- Location: Wellington, New Zealand
Re: Accelerator pump housing
I'll let you know when I get it :)
-
- New Member & Happy To Be Here
- Posts: 4
- Joined: Sun Feb 24, 2019 11:52 pm
- Location: Wellington, New Zealand
- Location: Wellington, New Zealand