The screw set is worn and I want to replace it but the oem part is unavailable. There are a number of Honda's that use the same set with small differences. I'm looking at Honda 16028-HM3-L00 SCREW SET, it looks the same minus the mounting bracket. Has anyone used this one successfully?
Idle Adjustment Screw Set
-
- Forum Regular
- Posts: 42
- Joined: Sun Jul 05, 2015 3:42 am
- Location: KANSAS
- Location: KANSAS
-
- ICOA Technical Director
- Posts: 4778
- Joined: Sun Oct 01, 2006 8:05 am
- Location: Knox, PA
- Location: Knox, PA
Re: Idle Adjustment Screw Set
What do you mean 'worn'? The only things that ever happen to these are the rubber comes off, easy to replace with heat shrink, or the spring under the rubber gets rusted enough to break. Otherwise, they don't get 'worn'. The set you show here is likely fine as long as the overall length is the same as the CBX one.
Dave
Dave
-
- Power Poster
- Posts: 376
- Joined: Mon Mar 25, 2019 10:26 am
- Location: NJ USA
- Location: NJ USA
Re: Idle Adjustment Screw Set
He may have meant “ugly” but that can be cured :)
1979 CBX (faster Red)
1981 CBX Streetfighter
2017 Aprilia Tuono.
Past rides : FZ1, BMWS100rr,S1000r,k1300S,YAMA RD350,Enfield 350
1981 CBX Streetfighter
2017 Aprilia Tuono.
Past rides : FZ1, BMWS100rr,S1000r,k1300S,YAMA RD350,Enfield 350
-
- ICOA Member
- Posts: 78
- Joined: Sat Aug 10, 2019 12:43 pm
- Location: Salmon Arm, BC
- Location: CANADA!!!!
Re: Idle Adjustment Screw Set
Ya...I took mine to the platers and had it done with all the carb brackets, looks like new now.
Forrest Miller
Honda CBX 1000- "A cosmic haymaker of a motorcycle" -Mr. Tadashi Kume
Honda CBX 1000- "A cosmic haymaker of a motorcycle" -Mr. Tadashi Kume
-
- Forum Regular
- Posts: 42
- Joined: Sun Jul 05, 2015 3:42 am
- Location: KANSAS
- Location: KANSAS
Re: Idle Adjustment Screw Set
I'll just heat shrink it, looks like what Honda did at the manufacturer anyway. The threaded shank has a larger diameter than on the other models I found so they wouldn't work.