Can't get slow speed jet out

Can't get slow speed jet out

Postby Dmerc » Mon Jan 08, 2018 1:44 pm

Tried penetrating oil and the sheet metal screw trick and it won't come out. Does this jet have an o ring on it? Will some heat help? Carbs are nice and clean for the most part but this jet is plugged. Thanks for any tips.
Dmerc
New Member & Happy To Be Here
New Member & Happy To Be Here
 
Posts: 23
Joined: Mon Dec 18, 2017 8:12 pm
Location: United States

Re: Can't get slow speed jet out

Postby Larry Zimmer » Mon Jan 08, 2018 3:25 pm

Here's one good means: viewtopic.php?f=20&t=6817 Good luck.
Larry Zimmer
ICOA Web Post/Pix/Video Archive Mgt
ICOA Web Post/Pix/Video Archive Mgt
 
Posts: 1344
Images: 182
Joined: Mon Dec 15, 2003 3:32 pm
Location: Brighton, Mich

Re: Can't get slow speed jet out

Postby Dmerc » Mon Jan 08, 2018 6:34 pm

Larry Zimmer wrote:Here's one good means: viewtopic.php?f=20&t=6817 Good luck.


thanks allot Larry, the pics on that other thread are awesome. I was finally able to clear the jet but since you can't see the air bleeds it's anyone's guess as to whether they are clear or not. Guess I'll make the tap bushing and pull them all out. Thanks again,dave
Dmerc
New Member & Happy To Be Here
New Member & Happy To Be Here
 
Posts: 23
Joined: Mon Dec 18, 2017 8:12 pm
Location: United States


Return to CARBS: Cleaning, Rebuilding, Swaps, Aftermarket, Tuning, Syncing, and More

Who is online

Users browsing this forum: No registered users and 2 guests